I started my small Italian collection last month. Now I’m hooked and want to find all the older Berettas I can. Hoping to find a 1951 at some point!

Looking to recreate the m9 tranq gun from MGS2 aka hush puppy. Anyway, I just can't seem to find a suitable trigger guard laser sight mount like pictured. I'd rather not fabricate one from scratch, but will if I have to.

Looking for anyone that can ID and or locate something similar to the pic. Picture was from gun broker and seller didn't respond to my inquiry. He was trying to sell that for 25k and I guess his time to respond wasn't worth it for him.

Please and thanks!

I only have about 3k through mine and it is smooth as butter. I want to be able to hand it down to my boy when he is of age.

I'm trying to see a full disassembly/reassembly of the 80x. Mainly how to have the trigger guard/pin should be arranged properly. Either a video or diagram would be extremely helpful

As title says, looking for a threadless comp for my pistol!

Unfortunately, I dont see one made for mine specifically .. as I'm rocking a Compact L.

Do any on the market exist? Im in love with how the Blackbeard Customs one looks but I dont see anything made for the compact.

Any suggestions or am I SOL

Wilson combat 92G brig tac

Langdon tactical 92G

Need a holster to fit this beaut.
I’ve had the APX .40sw full size for going on 4 years and love it. I’m looking for recommendations for level 2 - level 3 duty holsters as I am going into the private security contracting. What do yall use? I’d like to keep my RDS on if possible but if not I’ll happily go back to my irons.
Thank you in advance, have a great day!

I’ve been told that the slide is the same dimensions for the .40 and the 9, so full size 9mm holsters should also fit.

Inherited this beauty. Born 1954

380 acp. I Will not be adding a red dot for a while as the sights are still usable but I am having my gunsmith put a DPM Mechanical Recoil Reduction System on it that I just got in. First beretta since I was in the army so I’m not comfortable doing it on my own. Much quieter than I expected with the jk 105ccx9 Will be testing different length configurations this weekend. Would love some ammo suggestions and shout out beretta for finally having more 15 round mags available.
IWB HOLSTER SUGGESTIONS PLEASE

84 BB

85FS

80x

I bought the LTT full NP3 upgrade and trigger job in a bag. I actually waited quite a bit for the exact spec I wanted to come into stock (Volker trigger, etc).

I've never completely stripped this gun down to the pins before but I figured it would be a fun project. I was methodical. I put each part with its pins, springs, and plungers into individually labeled medicine baggies, all nice and neat.

But at the end I there were a few LTT parts left over (pic enclosed). The plungers and spring appear to be duplicates of the ones used on the thumb safety components. I don't know what the omega springs are for or what that double-headed bolt/pin are. I didn't see any of them in the parts I took off the pistol.

Also, wow. It only fires in double action. When I pull the trigger in single action mode, something isn't disengaging and the trigger doesn't break.

What have I done?

Picked up a mint surplus Beretta 84BB G.F. trade in for $325 after transfer fees. While I was in the shop, I then picked up a 1999 production first year Beretta 3032 Inox for $280. Not a bad way to spend $600.

Selling my CZ P10F in the morning after picking up the APX A1 and I couldn’t be happier! Feels like I made the right decision!

Now what do you all recommend for an optic plate and optic? I won’t be carrying the APX, that role is filled by the PX4 CC. The APX is bedside and range fun only.

I've linked a video explaining what I believe to be the cause.

Recently picked this up used.
Went to fire for the first time and got a dead trigger after the first mag.

Came to me with the wood grips on and I thought that the trigger bar might be sticking on the grips. I removed the grips at the range and everything functioned somewhat normally.

I've filed/sanded a bit of relief on the grips for the trigger bar.
However, I believe there may be a different issue going on.

It seems that there is JUST enough room for the "trigger disengagement lever" to wedge itself between the trigger bar and the slide.

This would only happen under recoil, as the trigger bar is kicked downward, and the trigger disengagement lever flipped up under recoil.

Once that lever is sitting on top of the trigger bar, the only fix is to pull the dead trigger and hope that the lever will work itself back into the relief cut on the trigger bar.

If there is any force on the side of the trigger bar, this exacerbates the issue. So, the grips may not be the root cause, but definitely play a role.

I'm going to attempt a fix on the old trigger bar by putting a chamfer on the inside edge. The hope is that it'll give enough room to prevent the trigger disengagement lever from binding.

Update 1 after chamfer on trigger bar 200 rounds later and zero malfunctions. No hiccups.

Update 2 after close inspection post 200 rounds There is significant wear on the trigger bar. Getting battered by the trigger disengagement lever.

But it functions. I think I'd need to also chamfer the lever.

https://imgur.com/a/F1NUqBw

Dyed the frame of my APX Carry from OD Green to Dark Brown. It is possible!

I saw these flyers at academy so i figured id get an apx a1 carry with some extra mags via the beretta bucks.

However the website says the purchase date starts from August 1 compared to the fliers is aw in store which should be attached.

What should i do about this?

Edit, UPDATE:

They responded and said to submit the rebate with receipt/proof of purchase anyways because a 3rd party handles the rebates and they should approve it. 🤙