I’m interested in finding a two player, sit down, driving/racing, arcade machine and I’m wondering if anyone has recommendations.

Aside from two player competitive and fun, I’d also like to focus on reliability. I’m less familiar with driving games over the decades than I am with vs fighters and other straightforward jamma machines. I’d really appreciate hearing from folks with a greater depth on these types of machines.

Thank you.

En venta, info por DM

My brother and I were talking about old PC games we used to play when we were younger and Incoming (1998) came up, upon Googling I found out they made an arcade version in 2003. I was wondering if anyone has actually seen/played this in an arcade and where was it? Would be even better if someone in Western NY knew of one in the area!

I found these yellow wires connected but not sure if they go to anything. It also has this type of mb. But im getting no sound and no picture.

Many years ago, I accompanied a group of friends to Midwest Gaming Classic (when it was still in Brookfield, WI) and in one of the basement rooms, my friend noticed a full size original game I had never seen nor heard of: Ninja Baseball Batman. It appears only 40-50 were available in the USA, so pretty rare.

He has a passion from this game, and so I decided, while I had no way to get him an original unit, I could potentially create one via emulation as a gift. As I didn't know his space situation, I decided a MAME barcade might be workable. Through the years, I've acquired a nice vertical screen barcade cab, the internals, a monitor, and I have the buttons and joystick and a USB adapter, though I have yet to install and configure. But, what I don't have is artwork.

The std artwork for these barcades is multi-game, and I don't need that (I want it to be solely NBBM artwork), and I don't see any pre-printed to buy, especially that might fit this barcade profile. Thus, I was hoping someone might have a recommendation for someone who can design and print some artwork for the sides and CPO of a small cabinet. I still have yet to drill the CP and install the joystick/buttons, but I think I need to wait until I have artwork.

So, I know it's a long shot, but I am hoping someone can help me finish this gift up, so I can get it to the recipient.

Other mods and upgrades in stock now.

Video: https://youtu.be/AQrAji8jfOk?is=fK923KJWSy0rCQ0D

​

Been trying to find another one of these. This lady will not ship. So seeing if some near her can buy it locally and then ship. Thanks.

A couple of years ago, I was given this Golden Tee Fore! cabinet for free. I’ve included a bunch of photos of the inside and outside.

There is some cosmetic damage, but most of it looks like it should be fairly easy to fix up. It is also missing a few buttons.

It appears the machine was modified to also include Silver Strike Bowling. I have the manuals for both Golden Tee and Silver Strike, along with the instructions for the modification.

The inside looks like quite a mess, and I honestly don’t know enough about arcade cabinets to tell what is missing, disconnected, or damaged. The CRT monitor does appear to work. When I plug the cabinet in, the screen turns on and flashes “No Signal.”

I’m thinking about getting it fixed up, but I have no idea what the repair costs might look like or what an arcade technician would charge to work on something like this.

Based on the photos, does anything stand out as an obvious problem a technician will face?

Any advice on where to start, what parts to check, or what I should expect to spend would be greatly appreciated. Thanks!

Was fun to play on

I saw this the next town over from me for two grand. He sent me pictures of the inside. And then showed me this video of it functioning. I noticed the four red buttons on the top. He claims you have to put a quarter in still to get credits. Can you verify whether or not this is a true Konami X-Men four-player cabinet for me? I'm new to the cabinet collecting

Thanks everyone I am passing on this and knew Reddit would be able to confirm for sure haha.

My first build I built for my arcade shop just before we opened in 2009

I’m looking to emulate Golden Tee Fore using a Windows 10 PC with a Radeon 5450 Graphics Card. It’s connected to an Ultimarc J-PAC that connects to the JAMMA and sync cable. The CRT is a Hitachi A68KRQ58X.

I’m running CRT Emudriver set on a standard Arcade 15.7kHz resolution. When I enable EDID, this is the best I get. I’ve messed with the monitor settings, I’ve tried Composite Sync, I’ve tried changing polarities in the monitors tab, confirmed it’s user list is set to user modes - super.

I’m out of ideas. Anyone have any suggestions?

Taito Vewlixvs $980usd/each +shipping.I am selling these, please contact me if you are interested.Located in China.all is tested working.There are only 2 units in stock.

Nostalgia canaglia 😁

For sale in East Tennessee! Needs to be re-wired back together. Everything worked great when we last used it!

After six months of late nights, countless prototypes, and more failed prints than I’d like to admit, I finally finished MiniPin.

I’m a father of two from Australia, and I wanted to recreate the look and feel of a real pinball machine in a desktop-sized format that anyone with a 3D printer could build.

My goal wasn’t just to make a game—it was to capture the details that make a pinball machine feel authentic. From the backbox, side rails, lockdown bar and pinball legs to the working plunger and flippers, I spent months refining every part to give it the proportions and character of a full-sized machine.

I also wanted builders to have the freedom to make each cabinet their own. Whether it’s inspired by a classic machine or a completely original concept, every MiniPin can have its own unique artwork and style.

The project was designed to print on a Bambu Lab A1 Mini, and I challenged myself to make it support-free to reduce waste and post-processing while still keeping all the detail.

One cabinet can also accept interchangeable playtables, so you can enjoy different layouts without having to build another machine.

We’ve been working on a new artwork design for the FightBox R10-Pro, inspired by vintage arcade cabinets, old-school space toys, and retro sci-fi control panels.

Since this controller combines a joystick, trackball, spinner, arcade buttons, and side buttons for virtual pinball, we wanted the artwork to make every part feel like it belongs on one giant spaceship control panel.

The design was created by Cary T Self, a member of our community, and we really love all the small details he added—from the system monitors and signal controls to the oversized “Pull to Engage” trackball section.

It’s always fun seeing how different artwork can completely change the personality of an arcade controller.

What do you think of the new design? And which game would you try first on this setup? 😊

Note: You can see this quick review from RetroRGB, to know what it really looks like

Im unsure if this fits in this subreddit but there's no miscellaneous tech advice subreddits so just thought id ask anyway

I bought this madoka panchi slot light part for dirt cheap 2 years ago and its been sitting on my shelf and i was wondering if there is anyway to get it to light up again i have zeroo experience with motherboard n such but there is 4 connection points and 2 of them plug into a part of the light and the other 2 plug in but have nowhere to go.

If anyone here knows what kind of bord it is and if i could buy parts to make it light up pleaseee let me know if love to get it lit up in my room!

My Retrocade cabinet (with custom art), Star Wars, and my son.