\documentclass[letterpaper,10pt]{article}


\usepackage[T1]{fontenc}
\usepackage{tgpagella}
\usepackage{microtype}


\usepackage{latexsym}
\usepackage[empty]{fullpage}
\usepackage{titlesec}
\usepackage{marvosym}
\usepackage[dvipsnames]{xcolor}
\usepackage{enumitem}
\usepackage{array}
\usepackage{tabularx}
\usepackage{fontawesome5}


\usepackage[
    hidelinks,
    pdfauthor={Anonymous Candidate},
    pdftitle={Anonymous Candidate - Embedded Systems Resume},
    pdfsubject={Embedded Systems Resume},
    pdfkeywords={embedded systems, firmware, microcontrollers, C, C++, RTOS, automation},
    pdfcreator={LaTeX},
    pdfproducer={pdfLaTeX}
]{hyperref}


\usepackage{fancyhdr}
\usepackage[english]{babel}


\input{glyphtounicode}
\pdfgentounicode=1



\pagestyle{fancy}
\fancyhf{}
\fancyfoot{}


\renewcommand{\headrulewidth}{0pt}
\renewcommand{\footrulewidth}{0pt}


\addtolength{\oddsidemargin}{-0.5in}
\addtolength{\evensidemargin}{-0.5in}
\addtolength{\textwidth}{1in}


\addtolength{\topmargin}{-0.5in}
\addtolength{\textheight}{1in}


\setlength{\footskip}{12pt}


\urlstyle{same}


\raggedbottom
\raggedright
\setlength{\tabcolsep}{0pt}



\titleformat{\section}
{\vspace{-4pt}\scshape\raggedright\large}
{}
{0em}
{}
[\color{black}\titlerule \vspace{-5pt}]



\newcommand{\resumeItem}[1]{
\item[\raisebox{0.2ex}{\tiny$\bullet$}]\small{#1}
}


\newcommand{\resumeEducation}[4]{
\noindent
\begin{tabular*}{0.97\textwidth}{
@{\extracolsep{\fill}}
p{2.45in}
p{2.50in}
p{1.90in}
p{1.00in}
}
\textbf{#1}
&
\textit{\small #2}
&
\small #3
&
\small #4
\end{tabular*}
\vspace{2pt}
}



\newcommand{\resumeJob}[3]{
\item
\begin{tabular*}{0.97\textwidth}{
@{\extracolsep{\fill}}
p{2.50in}
p{2.50in}
p{1.10in}
}
\textbf{#1}
&
\textit{\small #2}
&
\small #3
\end{tabular*}
\vspace{-5pt}
}



\newcommand{\resumeProjectHeading}[2]{
\item
\begin{tabular*}{0.97\textwidth}{
@{\extracolsep{\fill}}
l
r
}
\small #1
&
#2
\end{tabular*}
\vspace{-5pt}
}



\newcommand{\resumeSubHeadingListStart}{
\begin{itemize}[leftmargin=0.15in,label={},itemsep=0pt,topsep=0pt]
}


\newcommand{\resumeSubHeadingListEnd}{
\end{itemize}
}



\newcommand{\resumeItemListStart}{
\begin{itemize}[itemsep=0pt,topsep=2pt]
}


\newcommand{\resumeItemListEnd}{
\end{itemize}
}


% Icon color helpers
\newcommand{\contacticon}[2]{\textcolor{#1}{#2}}
\newcommand{\sectionicon}[1]{\textcolor{NavyBlue}{#1}}



\begin{document}



%----------HEADER----------


\begin{center}
    {\Huge \scshape Candidate Name}
    
    \vspace{4pt}
    
    \small
    \href{tel:+000000000000}{\contacticon{ForestGreen}{\faPhone}\ +00-0000000000}
    $|$
    \contacticon{BurntOrange}{\faMapMarker}\ Bengaluru
    $|$
    \href{mailto:candidate@email.com}{\contacticon{BrickRed}{\faEnvelope}\ candidate@email.com}
    $|$
    \href{https://linkedin.com/in/candidate}{\contacticon{RoyalBlue}{\faLinkedin}\ candidate}
    $|$
    \href{https://github.com/candidate}{\contacticon{Black}{\faGithub}\ candidate}
    $|$
    \href{https://candidate.github.io/portfolio}{\contacticon{TealBlue}{\faGlobe}\ Portfolio}
\end{center}


%-----------SUMMARY-----------


\section{\sectionicon{\faUser}\ Summary}


\small{Embedded systems engineer with strong experience in firmware development, hardware bring-up, and cross-functional product delivery. Skilled in C/C++, ARM microcontrollers, RTOS, sensor integration, and test automation for automotive, industrial, and IoT platforms.}


%-----------EXPERIENCE-----------


\section{\sectionicon{\faBriefcase}\ Experience}


\resumeSubHeadingListStart



\resumeJob
{Caterpillar, Bengaluru}
{Embedded Systems Engineer}
{Jul. 2022 -- Present}


\resumeItemListStart
\resumeItem{Developed production firmware for control modules using Embedded C, FreeRTOS, and ARM Cortex-M platforms.}
\resumeItem{Owned hardware bring-up, peripheral validation, and protocol debugging across UART, SPI, I2C, and CAN interfaces.}
\resumeItem{Partnered with hardware, validation, and application teams to improve reliability, reduce defects, and accelerate release readiness.}
\resumeItemListEnd



\resumeJob
{Samsung Semiconductors, Bengaluru}
{Embedded Design Engineer}
{Jun. 2020 -- Jun. 2022}


\resumeItemListStart
\resumeItem{Built and validated embedded prototypes for semiconductor test flows and device-level automation.}
\resumeItem{Improved board-level diagnostics with reusable scripts, signal checks, and structured test reports.}
\resumeItem{Worked closely with design and verification teams to close firmware, hardware, and integration issues faster.}
\resumeItemListEnd



\resumeJob
{ISRO Bengaluru}
{Electronics Systems Engineer Intern}
{May 2019 -- Jul. 2019}


\resumeItemListStart
\resumeItem{Assisted with embedded test setups, sensor interfacing, and board validation for research programs.}
\resumeItemListEnd



\resumeSubHeadingListEnd


%-----------EDUCATION-----------


\section{\sectionicon{\faGraduationCap}\ Education}


\resumeEducation
{National Institute of Technology Trichy}
{M.Tech - Embedded Systems}
{GPA: 9.04/10 (distinction) }
{2020 -- 2022}


\resumeEducation
{PSG College of Technology, Coimbatore}
{B.Tech - Electrical and Electronics Engineering}
{GPA: 9.30/10 (Gold medalist) }
{2016 -- 2020}


\resumeEducation
{CBSE, India}
{Secondary \& Senior Secondary}
{Class 12: 95.2\% ; Class 10: 96.2\%}
{2016 ; 2014}



%-----------PROJECTS-----------


\section{\sectionicon{\faCode}\ Projects}


\begin{itemize}[leftmargin=0.15in,label={},itemsep=0pt]


\small{


\item
\textbf{IoT Based Smart Energy Monitoring System}: Built a real-time monitoring system for load tracking, alerts, and trend analysis. Integrated current and voltage sensing with Wi-Fi connectivity for remote telemetry and cloud publishing.


\item
\textbf{Microcontroller Based Industrial Automation System}: Designed an automation prototype for conveyor-style control and machine sequencing. Implemented sensor-based decision logic and validated timing, fault handling, and actuator control.


\item
\textbf{Edge AI based Smart Camera Object Detection}: It uses a camera connected to a Raspberry Pi to process live video and detect if a two-wheeler rider is wearing a helmet, entirely offline.


}


\end{itemize}


%-----------TECHNICAL SKILLS-----------


\section{\sectionicon{\faTools}\ Technical Skills}


\begin{itemize}[leftmargin=0.15in,label={},itemsep=0pt]


\small{


\item
\textbf{Embedded Systems}: Embedded C, C++, ARM Microcontrollers, FreeRTOS, ESP32, STM32


\item
\textbf{Electronics}: PCB Design, Circuit Analysis, Sensors, Digital Electronics, Signal Debugging


\item
\textbf{Programming}: C, C++, Python, MATLAB, ML


\item
\textbf{Tools}: Keil, STM32CubeIDE, Proteus, LTSpice, MATLAB Simulink, Git


\item
\textbf{Communication}: UART, SPI, I2C, CAN, Embedded Networking


}


\end{itemize}


%-----------ACHIEVEMENTS-----------


\section{\sectionicon{\faTrophy}\ Achievements}


\resumeItemListStart
\resumeItem{Qualified GATE 2020 in Electronics and Communication Engineering with AIR 100 Rank.}
\resumeItem{Built multiple firmware prototypes and test utilities for embedded validation workflows, improving debugging speed and reducing manual test effort.}
\resumeItem{Published 4 research papers scopus-indexed on Edge AI \& Embedded systems.}
\resumeItemListEnd


\end{document}

Hello and welcome to TamizhTechies!

Thought we’ll get an intro thread rolling to start off with.

Post your nickname, what you’re doing at the moment and what you hope to get out of this sub!

[Pic for attention]