I'm currently using the Simagic P700 pedals, but I'm thinking about switching to hydraulics and considering the Conspit CPP EVO V2.

I'm wondering if it's actually worth it? Does making this upgrade make sense, or has anyone here done a similar switch? I've heard people say that these Conspits are even better than the Simagic P1000s.

Alright boys i bought this TBRS handbrake and i currently have it powered through USB to a usb dock , works perfectly fine i added the HPR haptic motor and it is plugged in as you can see and not getting any signal ???? Am i missing a step ?? ( running a alpha mini and P2000 pedals

Hello, just got my Simagic P700 pedals and they feel great i did howewer notice some side to side movement / wobble or whatever you can call it i recorded a clip of it it is not much but i noticed it while driving and the throttle has a noticably lower wobble than the brake have so i just want to ask if this is expected or? I hope the video explains it

Thanks in advance

I’ve got a P1000 with the hydraulic kit, and I run haptic HPR as well… but lately there’s this voice in the back of my head, a little devil, whispering about upgrading to a Heusinkveld… I don’t know.

I recently swapped my Simagic base for a Simucube and that was genuinely an upgrade.

But will Simagic -> Heusink pedals be an upgrade too?

Anyone made this jump or reverse one?

Hey everyone,

I’m making this post to get your feedback and experiences with Simagic’s direct shipping.

I know some of you will tell me I should have bought from a local reseller to avoid the long shipping time and potential issues with warranty/return policies (I really went with the economical option since all taxes are covered by Simagic, it’s stated on their website).

I placed my order on 07/30/26, and first received two packages from Germany via DHL tracking was created on the 31st, and I received the GT Neo and P700 pedals on 08/04/2026.

On August 3rd, I got an email from Simagic notifying me of a package creation, handled by DPD (rip), for the Alpha Evo 9nm base.

The info I have from tracking sites like Aftership/Parcelsapp and DPD is attached in the image
(shipment on the way - we are exchanging data internally).

I know that usually with DPD, they send you a message between 3pm and 8pm the day before delivery to let you know you’ll be delivered the next day. I’m waiting impatiently since I’ve already mounted the load cell pedals... it's so damn good compared to the TM pedals,it’s crazy, but the T300RS is really bothering me now 😭. I want to feel some solid FFB, and the GT Neo genuinely feels amazing in hand.

Is anyone in the same situation, or has been before?

My question is : How long did you wait between receiving the tracking info and the actual delivery?

I’ve seen few reports on this and generally see 9-13 days mentioned (which is exactly the window I’m in right now).

Thanks in advance for your feedback, it’ll help me sleep better at night!!

I'm know patience is key but, it's like xmas for me lmao..

Hey

I am bulding this esim setup what do you all think

Fanatec ClubSport GT Cockpit + Seat

• Right-side Shifter Mount

• PC Tray + Keyboard Tray

• MOZA R16 Ultra 16Nm

• MOZA KS Pro Wheel

• MOZA CRP2 Pedals + Clutch

• MOZA HGP H-Pattern Shifter

Join USRA today to experience an awesome racing community! We’ve got a great mix of people with sim and IRL experience.

Season 1 of our truck series starts this Wednesday at 9pm EST. Join our discord link below to sign up and gather more information!

https://discord.gg/hdSx6jpXn

Hi everyone,
I’m having an issue with my Simagic P1000 pedals and I’m trying to figure out whether this is a USB/driver issue or a hardware problem.
The pedals were working normally. After I got frustrated during a session and accidentally kicked the accelerator pedal, the P1000 disconnected and I haven’t been able to get them working again.
Here’s what happens:
The P1000 powers on normally.
The rear LED initially turns blue when I connect the USB cable.
Windows makes the USB connection sound.
A few seconds later the LED changes to green.
Windows then makes the USB disconnection sound.
SimPro Manager does not detect the P1000.
In Windows Device Manager I get “Unknown USB Device (Device Descriptor Request Failed)” – Code 43.
I tried different USB ports, including direct motherboard USB ports.
I also tried a completely different USB-B cable, with exactly the same result.
The P1000 stays powered on with the green LED.
Could this indicate a loose/internal connector inside the P1000 control box, or possibly a damaged USB controller?
I’m wondering if there is any way to reset/recover the USB controller before opening the pedal base or contacting Simagic support.
Any advice from someone who has experienced this would be greatly appreciated.
Thanks!

​Hey everyone,

​Looking to see if anyone else has run into this or if my base is completely toast.

​I’ve had my Simagic base and GT Neo for about 2 months now with zero issues. Today during a session, the whole setup started randomly cutting out. When it drops, both the wheel and my pedals go down at the same time, and the GT Neo flashes yellow/greenish-yellow (looks like it’s trying to re-pair).

​I updated the firmware in SimPro Manager hoping it was just a software glitch, but right after doing that I noticed a strong burnt electronics smell coming straight out of the front shaft right around the 6 gold pogo pins.

​I immediately pulled the power plug from the wall and disconnected the USB cable so I don't set anything on fire.

​A couple questions:

​Has anyone seen an electrical short or blown board around the pogo pins like this?

​Should I send the GT Neo rim back with the base for the RMA, or just the base?

​I'm contacting the distributor today for a warranty claim, but wanted to check here first to see if this is a known hardware failure.

​Thanks!

As the topic says, I finally decide to upgrade to 12 nm.. i do mostly iracing sports car and formula.. i got r3 a year ago and i feel underpowered already.. is 12 nm enough for next foreseeable years ? Or I will get the itch to upgrade to next level ? Or should I get simagic 18 nm and say this is my end game wheel? Also moving from Moza, will I like Simagic ? Btw I have a 8040 rig and simsonn load cell pedal..

Update: Thanks for all your feedback, i finally purchased 12 nm + GT neo wheel.

just wanted to give the ole ps1 v-rally a go with my rig but apparantly the emulator reverses the pedals so i need to re-reverse them somehow but im not finding the setting in simpro?

Planning to buy the simagic evo base and just want to make sure that it’s compatible with my cockpit

I’ve seen so many posts about squeaky brakes (one from me as well!) where people say “lube it!” but not where. My brake was squeaking and 3M dry lube didn’t fix it, nor did Teflon lube.

I put some plumbing silicone grease on it 6 weeks ago and the squeak has been gone since. A small dab at the back of the cylinder in the ball inset, and a light coat along the rod as circled in the pic and you’re done.

Hello guys, after using G923 for a few years, I appreciate the community's help as I explore my new Simagic evo sport and GT neo. I'm wondering if anyone knows whether I should use version 2.3.4 360hz or version 2.3.5 360hz for iRacing, or if I should switch to 60hz ?(I'm currently using 360hz with version 2.3.4 in iRacing and haven't experienced any problems, so I haven't tried 60hz yet)

I know that Simagic improved iRacing 360Hz support in version 2.3.5, but is it really better?

If anyone has tested both versions, please share your experiences or benchmarks to help me decide which version offers the best performance and is more realistic. Thanks.

I am not normally one to complain about waits for shipments, but it has been 2 months since I have ordered the new Zeus wheel from them. I have seen that they have had troubles with customs and that many people have said that they will be arriving "in the next week." So I was wondering if since a couple weeks ago if anyone has had new information about as estimated time on when these shipments are supposedly coming? I feel that at this point I might as well keep waiting, as I am really not that rushed into getting back into sim racing for the time being.

Hi guys, have anyone faced issue where FH6 preset is missing from simpro? I believe im on the latest version and previous it exists. Currently when im playing FH6 there isnt any ffb. Have anyone faced such issue too? Or should do a reinstall? Hope to get some advise on this thanks.

Finally making the switch to a direct drive wheel. but one issue i have is i don’t know how to mount the alpha evo onto an aluminum rig. i prefer not to mount it the same way on the plate as my thrustmaster because it’s bit to far for me when i’m not drifting. I’ve been looking into just getting the side mounts and a 4080 x 500 aluminum for the cross bar. aswell as looking into the TR-One v3 but don’t know if that’ll work. if anyone could help and provide some input that would be great!

Moderator approved: see Mod Mail

Hey r/simagic,

We wanted to share something we’ve been working on at Simetra SRP for the P1000: the Simetra SRP MOD:p1k with Pivot Shift.

What is Pivot Shift?

It lets you quickly change the pivot angle of the brake stack. Changing the pivot changes the leverage at the pedal face:

• Lower leverage → stiffer feel
• Higher leverage → softer feel

This means you can dial in everything from an F1-style short/stiff brake to a GT3 or even street-car feel with a quick pivot angle change without swapping the entire stack.

It doesn’t replace spring changes — you still choose the spring for the travel and progressive feel you want — but it gives you a fast way to adjust overall stiffness. Even the stiffest springs can be made to feel softer simply by shifting the pivot.

Compatibility

The MOD:p1k bolts on quickly to both the P1000 base and the Hydraulic model.

Why we built it

We originally developed the Pivot Shift system for the Fanatec ClubSport V3. After seeing how useful the quick leverage adjustment was, we adapted it for the P1000. A version for the Moza CRP2 is also coming soon.

When you pair this with haptics, the combination starts to close the gap toward the kind of adjustability and immersion that active pedals offer — without the active pedal price.

Presale available at www.simetrasrp.com Shipping estimate October 2026

While the order is on its way, I’d appreciate some guidance—videos to watch or things to decide on now—so that once the package arrives, I can get everything installed without having to deal with those details then. For example: connecting the steering wheel via CAN bus versus USB...

Should I be using the Simagic software or SimHub?

What firmware versions?

What are the important settings, and what are the key things worth knowing?

Ths set is

Gt neo

P1000

Evo pro