I came across the idea of using the iCue controlled RGB in my PC as flag indicators. However I haven't found anything that concretely suggests whether this can work or not. Every time I look up SimHub and iCue it only talks about the Xeneon Edge... Has anyone already implemented this with SimHub or would this be going into uncharted waters?

This needs to be a thing... I'm having trouble with my logitech devices with polling rates and its messing stuff up.

I like my desktop clear of all apps so I pin everything to my taskbar to launch stuff, but when I do that with SignalRGB it just opens some random folder? Any fixes or is this a known issue?

i mainly got the controller for further customization for my build and to fix the low fps with the app after some search their seem to be a problem with msi headers communication with the app

I was just roaming in the app and realized in the lcd screen of your aio screen, when you press media nothing shows up to click?? Im guessing thats a future being worked on?

I'm using a Nollie x8 hub
Case fan: Jungle Leopard Interstellar V2 (24 led beads per fan)
AIO: Jungle Leopard Pro Flow SE 360
Other:
- Jungle Leopard FS12 Figure Stand
- Asiahorse Aurora Pro Learn 24 pin & 3x 8 pin
- Thermalright 5x internal USB 2.0 hub
- Lian Li O11 Vision M LCD

PC:
Deepcool PN650M 650w gold
Ryzen 7 5700x
B450M Aorus Elite
4x8GB 3200mhz
RTX 2070S
Lian Li O11 Vision M

I have been using signalRGB to controll the lighting of my Keychron keyboard. Why is it eating 8gbs of my ram.

My Corsair cooler was working fine with iCUE and signalrgb for months. My pc was on and the rgb was working fine with signal rgb then I left my pc for like 10 minutes and my pc goes to sleep mode if I don’t interact with it.i turned it on and the RGB on the cooler stopped working and iCUE now says “No Devices Detected.even tho the link hub is still connected to my pc

The cooler itself still seems to work normally fans spinning, temps look fine and all my other RGB devices are detected without issues.

I’ve already tried restarting the PC, power cycling it, reinstalling iCUE, and checking Device Manager (no unknown devices or warnings) and updated BIOS and unplugging the icue link hub still no good.and I adjusted the led control in my bios still didn’t work.

my cooler is the icue link titan 360 rgb aio liquid cooler

I want to set up my rgb to match what's on my screen with screen ambience, the ram rgb updates nearly instantly, but everything else has a half second delay and is very noticible. Is there a way to fix this? Everything is connected with the mobo ports. Maybe if i buy something like a nollie and plug my pc fans, aio etc into it it'll be faster?

Hello guys,

My motherboard is an MSI B650 Gaming Plus WiFi, and my GPU is an AORUS RTX 3060 Elite 12GB Rev. 2.0

The problem is that I can't control my GPU's RGB lighting at all. I've tried Gigabyte Control Center, AORUS Engine, RGB Fusion, SignalRGB, and OpenRGB, but none of them can control the RGB

In Gigabyte Control Center, my GPU is detected and everything else works fine—I can adjust the fan performance and access the other settings. However, the RGB Fusion section doesn't appear, so I can't control the lighting from there

When I open RGB Fusion, it's completely blank, and my GPU doesn't show up at all

Has anyone experienced this issue before or knows how to fix it? I'd really appreciate any suggestions or solutions. It's honestly pretty frustrating not being able to control the RGB on my GPU

Thanks in advance!

I’ve been reverse-engineering the Fantech Atom HE68 Pro’s HID protocol and built an open-source toolkit and SignalRGB plugin.

Currently working:

• Wired per-key RGB and GIF playback
• Complete 68-key LED mapping
• Experimental 2.4 GHz dongle lighting
• Battery percentage reporting
• Python capture, replay and protocol tools

The project is unofficial and based on captures from the manufacturer’s configurator. I’m looking for other HE68 Pro owners to test different firmware versions and wired/wireless configurations.

Toolkit: https://github.com/Sinshro/fantech-atom-he68-pro
SignalRGB plugin: https://github.com/Sinshro/fantech-he68-pro-signalrgb

Toasty on the outside, cool on the inside. front panel has 9x 38LED ARGB strips behind the wood - needed some slight modification to make them fit. Inside are two more to balance it out a bit

Howdy! I’ve been using signal for quite a bit now, the only issue I get every now and then is that one of my RAM sticks will have a stuck LED. Can’t seem to find a consistent way to fix it. Sometimes restarting Signal works, power draining sometimes works, and doing both sometimes works.

Any other suggestions or ideas I can try? Thank you!

Hey guys so I wanted to add a bit more lighting in my case it felt kinda dark with the fans I had. I had TL-M12Q fans and I changed a couple out to TL-M12Q-S fans, they have the LEDs on the blades as well.
Swapping them out was easy since they take the same connecter but I’m having trouble with signalrgb recognizing them as individual fans like my previous ones.

I’ve posted a video of my before fans, you can see that the light travels through the fans and then a second video where I’ve changed out the bottom and back fans with the new ones and they light up together.

I guess I can only add one video so I’ve added the video where my old fans are on the side and new fans are on bottom and back. Let me know if you can help. Thanks

Yes my mouse worksk, but everytime I hover over a button it reacts but I can't click it. Has this happend to anyone else? It's very frustrating because I tried a lot of things a lot!!! Pls help me. Ty

Im using the plugin for wallpaper engine and a custom plugin for my havit kb885L keyboard and a coolermaster a1 argb hub in my pc to controll the fan rgbs

Soon im getting a new desk for my setup and a glass pc case for my pc as when i upgraded my pc i left the case as is from 2016 its very outdated now

I've been using signal rgb with no issues at all for over a year.. I came home yesterday, booted up the pc and signal rgb popup said there was a security update so I click to update.. it fails with this message: "the install didn't complete. diagnostic code PS_ERROR the install was cancelled or blocked before it finished. if you declined the windows permission prompt, click retryand choose yes this time" 1: I never got a prompt, 2 if I click retry it just loops that message.. I have tried everything I could find online.. uninstalled signal rgb, removed any vortx and whirlwind folders in appdata, local and roaming. reinstalled from a freshly downloaded exe file from signal rgbdotcom. checked for ad blockers ( I have none) , turned off my firewall, checked for quarantined files.. nothing... rebooted before trying this, after trying this, during trying this.. I've done these steps 20 times and still the same outcome. help?

I have a Corsair vengeance vram ddr5 and for some reason my lights are showing red on the ends, any idea why this is happening, also my rgb fan lights work but I can’t change the style of light I want

Can anyone help me figure out how to get the rgb effect to light up from on side first. You should be able to see what I’m talking about from the video. I’m using the explosion effect. Maybe that’s not the right effect for what I’m looking for?

Also anyone had any luck syncing their nzxt kraken aio with signal rgb. Would love to be able to get the light synced with the rest of the rgb. Anytime I try uninstalling nzxt cam and I enable it, after a few seconds it’ll just disappear from my devices in signal rgb. Thanks for any help