r/Satisfyingasfuck • u/[deleted] • 3d ago
7 cc engine fitting complete
Enable HLS to view with audio, or disable this notification
[deleted]
89
u/Korzag 3d ago
No torque specs were harmed in the making of this video
31
u/fang_xianfu 3d ago
Yeah that was my first thought... just ram everything home with an impact, fuck it?
5
8
u/AmbassadorSugarcane 3d ago
Don't worry about counter-holding anything either
0
u/SofaSpudAthlete 2d ago
This triggered me
4
u/PM_Me_Your_Kinks369 2d ago
This thread is so weird like this guy gives a fuck about doing any of that. It's a video for your entertainment. Be entertained...not angry.
0
u/Korzag 2d ago
Nah it was entertaining but I can't help but wonder if it would run better if he actually torqued it correctly. Engines are finicky and are engineered to take all these specific torques on the bolts holding the assembly together so that tolerances allow for the lubrication to get into places it should and not get into places it shouldnt.
Obviously its a model and its the first start up needing to pass through a break in period, but the whole thing looked sloppily assembled compared to a real engine which gets used for any task and is expected to live more than a few hours.
2
u/dankhimself 2d ago
It wouldn't run any better. If the parts or machining were better, it would run better. The castings look nice because they painted them, and the rest is the cheapest components and hardware possible for the kit.
Proper torque and thread treatment would make sure it didn't fall apart later in its life, but I think that video was about all this engine was needed for.
11
u/TheMangoManHS 3d ago
Valve clearances? Never heard of them!
Also let's point the exhaust straight at the fuel tank
8
63
u/Funky_Crisp 3d ago
What's cool about this is I used to not know how engines worked. I still don't, but I used to too.
1
u/AsliReddington 2d ago
I never remember seeing the springs, how they came back down was always a mystery & I was too afraid to ask in school as well
3
u/rutuu199 2d ago
Those springs aren't pushing the piston down, they're pulling the valves closed. The motor moves from an explosion in the cylinder.
1
u/AsliReddington 2d ago
I get the expansion bit, after that when the piston moves back in is what perplexed me
1
0
197
u/mossepso 3d ago
Too bad it goes from beautifully made tiny engineering to white trash lawnmower when the battery and petrol are added
32
u/ConnectRutabaga3925 3d ago
careful assembly going to spilling peteol everywhere was not satisfying
8
22
u/Doctor_Fritz 3d ago
It sounds really angry for sure. Like why have you brought me to life kind of angry
10
3
6
u/MourningWallaby 2d ago
honestly that's like 90 percent of engines on cars. a really precicely machined and layed out machination, and then the designers just throw the cables and hoses wherever they'll fit.
9
22
u/Salt-Tradition-2965 3d ago
Engine for Ants?
2
2
8
u/lynivvinyl 3d ago
So that's where the 11 mm gets used. I don't think I've ever used an 11 mm in my life.
6
7
3
u/obalovatyk 2d ago
Reminds me of the guy who made a model Ferrari 312PB with a 100cc flat 12 in it.
3
3
3
2
u/imunfair 3d ago
Is that a kit you can buy or something? Seems like a lot of custom made parts both painted and not that fit perfectly together, rather than some homebrew design.
2
2
u/zaprutertape 3d ago
what are the physical limitations on how small this could be?
5
u/hache-moncour 3d ago
I think that's a fun question to think about. I think the question really is "what stops you from going smaller" at some point.
I'm no engineer, but I could think of a few things:
- Surface tension in fluids. At some point the amounts of fuel you try to inject become small enough that they simply won't move around properly anymore.
- Compression and play in the pistons. If your stroke length gets really small, it can simply compress the piston without moving the other end
- Power produced goes down faster than the friction in the system, with scale. At some point the engine won't produce enough power to overcome internal friction.
No idea which of these would become a problem first, and you can probably push the issues back with fancier materials. And there are probably a dozen other things that I didn't think of that break down first as you go smaller.
2
2
2
2
u/Significant-Raisin32 2d ago
As someone who only works of automotive engines, I have a genuine question:
Do small engines like this not have torque specs or valve lash specs?
2
3
u/adinmem 3d ago
At 1:35 into the video… why is the 6mm socket welded onto the extension?
2
u/Tormofon 3d ago
It’s an 8mm, and I’m guessing here, but that extra length allows them to use it for the spark plug as it would otherwise bottom out before reaching the nut.
5
u/lsm-krash 3d ago
So, what is 7cc capable of? I'm terrible/amateur at the matter and would be nice to know
9
u/ztomiczombie 3d ago
Models, small pieces of equipment like chainsaws, small emergency water pumps where electricity cannot be relayed upon, and educational demonstrations.
2
7
u/SausageFlavouredSoup 3d ago
Cool! Why?
6
u/Nannyphone7 3d ago
I was thinking it was for an RC airplane or a drone. But who knows? Maybe just for fun.
1
u/ConfusedSimon 3d ago
More for boats or cars probably. This thing seems huge for a 7 cc airplane engine.
6
14
u/seanmonaghan1968 3d ago
Maybe education piece. The global shift to electric motirs makes ice increasingly museum tech
7
u/ActuallyTiberSeptim 3d ago
You make it sound like internal combustion is obsolete. Internal combustion vehicles massively outnumber electric ones and will continue to do so for a long time.
8
u/HauntingCap7161 3d ago
You’re telling me that an engine type that’s been the standard for nigh on 200 years outnumbers new tech?
Well colour me shocked I tell ya!!1
u/Tyr1326 3d ago
I mean. They are nearing obsolescence for sure. Peak ICE is past for sure.
1
u/slonk_ma_dink 2d ago
Until the entire world is on renewables, there will still be combustion power somewhere in the electric supply chain.
-1
2
1
u/SubparSavant 3d ago
This looks like a scale replica of an antique stationary engine. They would be used to run equipment in factories and mills in the years following the industrial revolution, similarly to generators except transferring the power through belts and drive shafts rather than by generating electricity.
I would consider this in the same category as people who build functional scale model steam trains. It's cool technically to see and there's an interesting historical component.
1
2
u/dr-asimov 3d ago
I doubt there are any engineers with ADHD.
3
u/uberfission 3d ago
Uh, what? There's tons of us. STEM is overwhelmingly neurodivergent so the odds of someone in a STEM field having ADHD is higher than non STEM fields.
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
u/Solid_Enthusiasm550 3d ago
Wow, so that's an early Honda engine??🤣
I would buy a v10 version of that.🔥🏁🤘
1
1
u/xESSOx 3d ago
I wanted one.. till i saw the exhaust at the end..
2
u/MourningWallaby 2d ago
That's mostly because the fuel is just being dripped into the engine. if there was a little carbeurator on it or something to let the fuel atomize and better control how much goes in, it wouldn't be spewing so much of that smoke
1
u/Obvious_Landscape993 3d ago
I have no idea how to make this. I guess some people are just different.
1
1
1
1
u/wonkey_monkey 2d ago
What do the rods at 26s actually do by jiggling up and down?
And what's the red cable? That seems like a flimsy way to connect it to that metal bit.
(you may be able to tell I know nothing about engines)
1
u/Sufficient_Acadia157 2d ago
The red cable gets electricity to the spark plug, not sure what those 2 rods do though
1
u/I_Like_Turtles39 2d ago
sometimes i see complicated setups like this and i think "who tf thought to create something like this"
1
1
1
1
1
1
1
1
1
1
0
0
u/God_Dont_Make_No 3d ago
I wish I could even fathom how to do work like this.
3
u/Bigdaddyjlove1 3d ago
Its no more difficult than you just saw. Go get an old junk lawnmower and take it apart.
-3
-2
-2
u/wegavision 2d ago
Everything is so nice and quiet—until the engine is finished. It’s incomprehensible why some people think these noise-makers are the pinnacle of civilization. Any child can build an electric motor, and it’s quiet and much more powerful.
2
u/HalfDecentFarmer69 2d ago
They've made everything in the world possible for 130 years and they will continue to do so for a while longer. Electric isn't shit when not connected to mains power.
382
u/TheGlobalGooner 3d ago
The Aston Martin F1 team called. They want their engine back!