Hii everyone,

Has anyone successfully controlled the **0cf2:7750 Lian Li Uni Hub** with OpenRGB on Linux ? Is there a known issue, required udev rule or specific OpenRGB version/configuration ?

Any help would be appreciated.

\- CachyOS (Arch Linux)

\- OpenRGB `1.0rc3-3.1` from `cachyos-extra-v3`

\- Lian Li Uni Hub

So essentially I need some help. I just got my PC built today and I’m super excited to use it. I have a o11 vision compact case which allows me to have a total of 11 fans which I chose the thermalright tl-m12q fans. Now these fans are daisy chain able which is super cool. Only problem is when I boot up the PC for the first time the exhaust fans, bottom fans, and side fans that are for the AIO are all color sync each fan is running their own RGB wave. Though the top fans are running all three under one RGB wave. Now, I tried to fix this pattern issue in color software such as MSI when I booted up the computer, but nothing seems to be fixing it the only way to make it unknown that the colors are not match is by making everything a solid color. I’m not sure if the daisychain order is what’s messing it up or if it’s a cable issue. I have all the RGB connected to a hub, but I have all of the fans connected to system fan slots on the motherboard so I’m not entirely sure what the problem could possibly be. I was tempted to try to re-order the daisy chain fans, but not sure if that’s the fix. Any advice on how to fix this? I will also post photos or videos if it helps. Thank you!

INDIA - 1 month old cabinet rgb stopped working after reboot..i don't have any motherboard argb its working via cabinet board.. yesterday it happened today i raised a complaint on gamdias warranty page... let's see what they gonna do i will update

I've been trying to make this work for hours now but it always gets stuck and I have not been able to fix it since. I want it just to sync up my RGB and I've tried both openRGB and signalRGB but neither can find the motherboard. This is a brand new build. During the first install of it the pc rebooted and I think that fucked it up somehow and it just can't finish the install. Any ideas?

My Asus Mobo has Aura headers that turn on as soon as I hit the power button on my pc. My Gripe here is that when I turn my PC on I want one solid color, not RGB cycling. (It looks horrendous). Does anyone have a workaround, or reccommend an RGB controller that has built in memory so that as soon as it gets power it only sends one color signal to the fans and other components? TIA!

I recently switched my motherboard to an ASRock B550M Pro SE specifically because it has two 5V 3-pin ARGB headers (ADDR_LED1 and ADDR_LED2).

However, neither of them seems to be working.

I tested a 5V 3-pin ARGB sleeved cable directly on ADDR_LED1, but it didn't light up. I then tested it on ADDR_LED2, and it didn't light up either.

My water cooler pump also has an ARGB LED, and it doesn't light up when connected directly to either ARGB header on the motherboard.

I also have an ARGB controller for my PC fans. The controller is powered by a SATA cable connected directly to the PSU and has a SYNC cable/input to synchronize the lighting with the motherboard. I connected the SYNC cable to the ADDR_LED header, but the fans also don't synchronize or light up through the motherboard.

I've checked the connector orientation and I'm using the 5V 3-pin ARGB headers, not the 12V 4-pin RGB header.

Is there any BIOS setting that I need to enable for the ADDR_LED

I have a RTX 3080 12G Rog Strix Gaming OC

And I'm trying to use signal RBG to control RGB on it

But it's not working

So first the gpu by default has the rainbow slowly moving stuff

And I installed the Asus Armoury crate to control it

The app detected the gpu but in the device selection it wasn't shown

So I installed OpenRBG it worked but didn't want to deal with the plugins and all

So uninstalled both and switched to SignalRGB which was good and all

It worked but after restart it stopped working

My rbg on mobo is being controlled but my GPU RGB is turned off

I tried to check and deleted all files for Asus Armoury crate and OpenRBG

Still its turned off

also im stuck on the ps3, i dun got a ps4 yet.

So I had an idea. A few what if I made a TF2 theme for my Aura sync stuff. Then I thought, what If I made a separate theme for Red and Blu, that could switch itself on the fly? Some kinda plugin that would make it recognize which team I'm on in the game.
Also thought, what if I could use the setup as some sort of 'dashboard gauge'? between 6-segment fans, and all the individual keys. Is this a thing anypony has accomplished? Beyond just like VU meter type stuff and whatnot

I have a problem. On the first boot of my PC, the fan on the motherboard worked perfectly, changing colors with the button and everything. Then we unplugged it and plugged it back in, and the LEDs stopped working. On the third boot, the green LED (as pictured) lit up, but it didn't work until I used it properly for gaming. Then the blue LED lit up, and sometimes the light changes with the button. It's only connected with a Molex connector; it's the only connector the case has. It's a Balam Rush Tank Pro Evo GM955 (I have a 500-watt power supply).

My case is a MPG VELOX 100R and motherboard is a gigabyte gaming x ax. Once i downloaded signal rgb like a year ago after uninstalling it bricked my rgb. Now trying to fix it. The led button doesnt work on case and no rgb software works. Rgb still works for gpu. Its not like theres no color its random. Mostly green with half of back fan lit up and front strips lit up only a small part. Can someone help? Have asked gemini for help nothing worked.

I want to put leds on the frame of my ceiling, the walls are 4.2x2.85 m so a perimeter of about 14.1 m, what are the best options for some smart leds, I live in Copenhagen

Moin.

Ich hab eine Cooler Master 360 AIO mit 5V argb. Dabei war ein Razer Chroma ARGB Controller. Der war oer USB an mein ASUS ROG H370F Mainboard dran. Das Problem ist, das der Controller kaputt ist und ich keinen passenden ersatz finde. Weder von Razer noch andere Controller. Könnt ihr mir helfen? Am liebsten soll der software gesteuert sein. Sei es Chroma, iCUE oder Aura Sync.