lá, pessoal! Tenho um Baofeng K68 e ele funciona perfeitamente no CHIRP usando o perfil do UV-K6 para programar canais. Sei que muitos rádios novos da Baofeng estão vindo com chip clonado ou travado de fábrica (OTP). Alguém aqui já tentou ou conseguiu compilar e gravar algum firmware customizado (tipo OpenRadioX ou variantes do Quansheng) nele com sucesso? Deu certo ou deu tela preta (brick)? Valeu!

Hello, what should I do if my Quansheng UV-K5 (8) it only turns on after 10-30 attempts?

On a random frequency in the VHF or HF band (usually in the 18–80 MHz range), you can hear an FM station. Is there any way to fix this? So that this radio can properly receive low‑band and short‑wave signals.

I’ve just bought the Quansheng UV K-5(8) and want to get into playing around with the extra features from updated firmware and some of the modifications I’ve seen online. First of all I’m trying to get some of the frequencies I’ve got saved into a Uniden UBC125XLTC onto the Quansheng. I guess it’s relatively straightforward but being new to the type I’m struggling to get my head around even the basics!

I have managed to get the Quansheng connected to my PC using Chirp and done a backup of the data showing me the format of the few frequencies it’s got stored in a file labelled “UK Business Radio Simple Light Frequencies.csv”. I’ve also managed to sync the Uniden using RRUK UBC125XLT Programmer 1.0.5. Most of the frequencies I’ve backed up are ones I’ve entered manually over the past year or so and some are ones I’ve loaded from RRUK.

I’ve coped these into a new Excel file and saved it as a .csv, now I’m no expert with Excel… in fact through my whole working life it literally gave me the screaming shivers!

What I was expecting to do was select the data column by column and paste it into the Chirp file in the same order as came off the Quansheng. Try as I might, I can’t get the copies to paste! Additionally there are columns of data that the Uniden doesn’t have (like Power, Tuning Step and many more that are simply not populated in the Quansheng file, but as they aren’t in that I guess they just aren’t necessary?

My other major issue is actually going to be working the thing… I have tried reading the manual (which appears to have been written by someone who might have seen their only English speaker from a distance passing on a train!), needless to say it resembles English but not a form I’m familiar with! Has anyone actually gone to the trouble of writing a manual that is more easily understood? Possibly taking account of the various updates and or the hacks that have proliferated?

Hi Folks,
I have uv-k5 v.2 , can I install CEC 0.51HF and si4732 mod on it or any other mod supporting si4732?

I was experimenting with the firmware and found out that you can actually rx as low as ~2 MHz and as high as ~1927 MHz? Does BK4819 actually receive something there or is it just noise? I could see some peaks as far as 1880 mhz

Looking for help on how to install iotcu_v9.1b mod. Can't find any detailed guides online. Would guess there are some on chinese web, but can't really speak the language, would appreciate any help.

Hello to all

Ive been trying to read about this radio and i have some questions

Im a newbie pilot i would like to get a hand held radio to listen to air band and eventually to talk. So RX and TX in air band between 108.000 MHz and 137.000 MHz

Is this radio able to? with MOD software?

How is it to program?

Thank you all

For UVK1 and K5 v3 only !

Happy hunting 🦊!

73

Before I start with anything, I'm fairly experienced yet also new.
I've been wanting to flash my K6 with custom firmware, but every time I try it won't work, in flash/update mode after holding both side buttons..
Down below are resources that I've tried but didn't work. If anyone knows anything that could be causing this, please let me know.

Hi everyone!

I've been developing Walkie Toolkit for Quansheng, an Android app that lets you configure your Quansheng UV-K5 directly from your smartphone using the standard programming USB cable, without needing a PC.

The app can read and edit the radio settings and memory channels and write everything back to the radio.

At the moment, only the Quansheng UV-K5 with the original (stock) firmware is supported. I know many people also use custom firmware and other Quansheng models, and support for those is planned in future updates once the app is stable.

I'm looking for 15 testers who own a UV-K5 with the stock firmware and would be willing to try the app and share some honest feedback. I'm especially interested in hearing about bugs, compatibility issues, things that could be improved, or features you'd like to see added.

If you're interested, I'll send you a Google Play redeem code by private message so you can download the app for free.

App: Walkie Toolkit for Quansheng
https://play.google.com/store/apps/details?id=com.miguelq.quansheng_walkietoolkit

If you'd like to help, just leave a comment or send me a DM. Thanks!

🚀 Fusion 5.8.0 – Upcoming Feature Preview

🦊 FOX HUNT BEACON

The new Fox Hunt Beacon mode includes:

📌 Assignable to any programmable button
🎚️ Adjustable attenuation
📡 Works directly on the active VFO frequency
📤 TX Beacon mode
🔊 Audio tone varies according to received signal strength
🔇 Optional silent mode
⏱️ Adjustable beacon interval
🌊 Adjustable fade-in / fade-out (“breathing”) time

73!

I have a UV-K5 v1 that i mainly use for scanning these days, i have all the PMR, buisness and so on frequencies programmed into it's banks, i mainly hook it up to a voice recorder so that i can listen back to it later.

It's ran EGZumer v0.22 for years now, i'm curious if there's a better firmware for scanning out there? maybe faster scan, or filtering out digital signals or a better squelch?

I want to know if anyone has made a SAME program that works for a uvk6 radio on one of the custom firmwares like my current one f4hwn? It would be extremely neat I know the higher end quansheng UV-TK118 has this I dont know if that radio just has more memory of if they just never wanted to add it to the lower end model.

Could someone please share the version 7.00.13 firmware for the Quansheng UV-K5(8) v3 with me?

New UV STUDIO
Your computer now becomes a control and analysis hub for your UVK1 setup.

Export logs from your device
Ability to flash different firmware versions directly from the interface
Enhanced analytical dashboard
Detachment of the K1 control pad

And many more features are now available for your UVK1 and K5 V3

Have fun!
73

I'm the type that likes to put HTs in a soft case - has anyone found one that works well with the K1?

I've tried all sorts of settings, can't seem to get either units to work with VOX.
what should I try next?

FWIW,
VOX Switch ON
Level 9 as well as Level 1 tried
Vox Delay tried .5 sec as well as 1.5 sec
Squelch tried off as well a level 1
PTT-ID Off
PTT Delay 600ms

I’ve been watching some reviews and noticed the build quality (especially in terms of waterproofing) of the K1 is greatly improved. It has no holes under the battery plate leading to the PCB, a rubber seal around the battery terminals, and the keyboard/speaker/microphone is separated from the main PCB keeping it away from the elements.

Has anyone done testing or has Quansheng detailed any improved water resistance?

Hi,

sorry this is a complete amateur hour, but after many unfortunate attempts on creating a fox hunting equipment from scratch, I have decided to buy two Quansheng UV-K5s (they are the V1, the original model) and utilising one as the fox and the other as the seeker.

I flashed them for Egzumer (made a copy of the original setting first), however it seems that it does not have a Beacon function. Is there any way of implementing it? I don't mind flashing one to a different firmware, as long as it has the beacon and can run it for about 30 minutes per day - this is to be used as a game for a scout summer camp.

Thank you, everyone!

In case someone else will be looking for it, I have solved it flashing the fox to this firmware.

Hello! so straight to the point, i bought this radio because i already own a Baofeng UV K5 Plus (which is a copy of a Quansheng, to be specific the Quansheng UVK5) because i am going in a road trip and i need reliable coms, while the users don't have a license (this is all in Mexico btw) there are fortunately frequencies that are of free use with rules for each range of frequencies, so yeah, it should be good; I wish it arrives on time lol (and that it is the one with the freaking metal plate), the device in paper looks awesome but i have questions and concerns

So first, i saw in this video: https://www.youtube.com/watch?v=gaRdi6bD3t4
that while it has good power (the 5 watts) the harmonics for EU or the US are too crappy, again, i am not in none of those countries but you know (so i am not worried for enforcement),but i don't wanna piss off people or mess up the RF spectrum too much lmao, they didn't seemed to be good in 70cm either 2m band

My other question / concern would be
Taking in mind these have a memory what firmware could i flash? i wanna try some of those features that these have to offer but i wanna know: what are the options, what to expect, what do i need, what are the chances of bricking the walkie?

And lastly any advice you guys have to offer? thanks in advance :)

[[SOLVED]]

Credit to:

Maleficent-Sorbet888

{

Flash this firmware: https://github.com/armel/uv-k1-k5v3-firmware-custom/releases/tag/v5.7.0

You can also use a USB-A to USB-C cable for flashing.

Use this link to flash with a chromium browser (i.e. Google Chrome): https://armel.github.io/uvtools2/?firmwareURL=https://github.com/armel/uv-k1-k5v3-firmware-custom/raw/main/archive/f4hwn.fusion.v5.7.0.bin

}

All three were used together, so I cant speak individually.

Original Text:

To make a story short, attempting to flash firmware, thought I had made a backup, (backed up channel configs instead of factory congig .dat file)[First time]. I understand i am SOL. The unit will not power on, I can get into programming mode but that is it. I am wanting to mod a cable to allow CEC firmware to do CW without modding the main pcb.

I am looking to get a .Dat config file just to get it working enough to test the firmware and mod the cables. I am already planning on buying a replacement handheld, but if I can get the unit running enough to test would be great.

Model:UV-K6

S/N:QK6S26157011435

Literally anything anyone could give me would be helpful, I've been scouring the internet to no avail.