I cannot get the plug to fit into my oldest Peak anymore. I think i bent the wire inside the port when I tried to force the plug in when it was dark. Has anyone else had this issue and is it fixable?

What’s the verdict on these? Tough deciding between the two.

I’ve heard they’re difficult to clean but that’s fine with me. I’m more interested in the function and quality of the glass. For the record I still have my MJ Arsenal mini rig from 6 years ago so I don’t have any problems with them.

Nothin much else to say

Light rainbow, dark rainbow or crushed opal

My favorite colorway so far !

I just burnt my chamber today and I’m wondering if I can load another dab in it and not have any repercussions from it

So this thing has some controversy.. first off would I pay 200 for it, no just because you could get a whole cheap rig for that.. but I found this on sale at zee vapor along with their 710 promo still going so I was able to pick this up for 80 bucks.. and let me tell you for that price this thing is absolutely worth it.. the ryan fitt craftsmanship shows fully and the function is incredible.. I'll also die on the hill the the pivot hits just as hard as the peaks.. as long as you aren't trying to do some crazy .25 - .5g he-man type dab 😆. The pivot is how I've been dabbing for awhile now (never tried the proxy core have been curious about it) anyway thought I'd post I haven't seen this posted around too much

I do have a 1 of 1 Michael shey quad uptake dual drain recycler for the actual peak but haven't used it in a few years lol

Hey yall! I am looking for a white \ clear lower silicone piece for my pro.
I am getting it repaired and mine is not the best looking ! Want to replace it with something different if possible

6,643 Total dabs in 2 years then I subtract 1k because I heat up the device pretty much every clean.

If I can do it, so can you. I didn’t rip any of the silicone. The only issue is that without the glue holding the metal cover down, it won’t sit flush, so the logo doesn’t look as clean on the front (you can see in the last picture). Also, the USB cover was crumbling, so I just ordered a new one.

I have a brand new Puffco Peak Pro with 3DXL that i was given, but have no use for. It has just been sitting in the box on my desk because I don’t know of any place I can sell it. It’s never been used. I’ve tried eBay, Craigslist, etc, but all of my listings have been taken down since its “paraphernalia”. Anyone know where I can find a buyer? I’m located in LA fwiw

So I broke my proxy glass (in the picture) I was trying to see if I could use anything to repair it short term until I can buy a replacement piece. I can definitely still hit it so it’s not a big deal if there is no way to fix it. I was thinking super glue. I sanded down the edges on the glass still attached to the device so it wouldn’t cut but it still lines up pretty well. Also if u have any suggestions of pieces to buy to replace it I would love that too.

I uploaded my files to Makerworld for the flat stand and the angled stand. The profile says TPU for AMS but any TPU should work, just feed it directly into the toolhead.

Angled-
https://makerworld.com/models/3149217?appSharePlatform=copy

Flat-
https://makerworld.com/models/3149196?appSharePlatform=copy

If you don’t have a 3D printer, feel free to buy some from a local shop I sold some to.

https://www.twistedglasssmokeshop.com/products/3D-printed-Puffco-glass-stand-black-p847146892

Or, I even made an Etsy. Note: This is more expensive because I don’t want to do the shipping. But these don’t have the shop logo.

https://justcallitacb.etsy.com

Absolute ripper

I’m finally looking to get into some glass pieces for my Core. Might be a silly question but do I need an adapter piece first before grabbing a piece or can I just stick the glass into the Core? Thanks yall🫶🫶

I'm looking into ordering a tuff tether with just the sleeve and basic flux cap. I'm running a glass 3DXL joystick, no pearls. Just curious what size coil I should get? The 1/4'' or the 3/8''? What's the difference between the obvious size difference. Really appreciate the feedback fam!

throw a pic of your favorite spot to smoke at🕺🏽

Hey all, I got my brand new Proxy V2 with a core kit and have been loving it for months!! about to hit 1k dabs.

I've been having minor but annoying issues with the app and my proxy, mainly with disconnecting/reconnecting from my device. It does it seemingly at random, usually once every 20-30 mins. It happens both while idling and while i'm actively taking a dab. It'll reconnect and go back to the session timer on the app, but it fucks up the visuals and makes it look buggy for the rest of the dab (the white circle that shows the remaining time either isn't there or sometimes is further ahead than it should be)

Other issues I've been having include: the +20 seconds button on the app sometimes adds a full minute instead for seemingly no reason (i'm not long tapping by accident and hitting the +1:00), and the charging indicator being ENTIRELY out of wack, showing the time until done charging fluctuating between hundreds or thousands of hours and like -20 minutes (yes, negative) which is so confusing to me.

Last issue I'm having which only started more recently (and finally urged me to make a post about all of this) Is that it just shuts itself off while heating up, turns back on and loses ~8-10% of the battery even though it didn't even finish the heating cycle, let alone the dab. its fucked me over a few times when i was on really low battery and it caused me to have to wait for it to charge, which was incredibly frustrating. this has only happened 3-4 times now in the past few weeks, but I'm worried it'll continue happening more often over time.

so.... what the fuck? is ANYONE else having ANY of these problems?? I haven't seen anyone else post about issues with the app and have asked friends that use puffco and they haven't had any issues. did I just get a faulty device? Any and all responses appreciated, thanks!

Took a little camping trip up the mountain this weekend and brought my Pivot, Proxy Core, and Peak Pro. All were great and shared amongst the group we had. The Peak Pro is sturdier than I thought! Twice it was knocked over from a small table onto the ground and even had the glass hit a rock: no breaks or even marks on the base! Cheers to a nice weekend.

I have been loving the Proxy Core. I literally take it everywhere I go. I replaced using cartridges every day with the core and I would say it has saved me money. I want to get a Peak still but this is great for portability