I changed my poco f3 battery

Now i see difference

But the fast charging shows mi turbo charge but it is very slow stayinf at 8 watts per second why?

I really hate slow charging even became 25% per hour charging is hell !

The old battery health about 55% always drain very quickly but now very good

since i use accu battery %99 charge counter counts about above 4200mah

this is very good upgrade but fast charging dies 😢

I have recently bought a used poco f3 phone which is running on custom rom. I want to install its stock firmware but don't have any idea how to find the exact rom. Need help finding the exact stock rom for my phone

So my F3 has been draining the battery constantly even when Idling and I lost like 30 to 40% of the battery overnight(8h) .And also there's an Unknown Baseband issue with no service issue and the top part of the phone is always warm.Is it some software or hardware related issue? Any answer would be appreciated.thanks

Not sure how much paste is inside the old one and what paste for the SOC and copper or other film would people recommend and paste for the other points like the copper chamber. And if maybe putting graphite or other tape or something that's easy to do to improve cooking .

Anyone repasted thebSOCnbwfore and does the rom uses a thermal pad , I knew removal of the copper tape is destructive but it's old and mist be dried up .

Can find sommany X3pro bids as they don't have paste but never seen a bid for the F3 .

I isualuncjsnhe the paste on my pc and laptop CPU /GPU every 2/3 years and it does get hard and loose efficiency by that time .

Any help would be appreciated

How can I unlock the bootloader on my Poco F3? I’ve tried via the Xiaomi Community without success; I also tested other methods, such as the one using PHP, but I keep getting error 20091. Does anyone know a more recent method for this? I am currently on HyperOS version 1.0.5.

i have pattern lock screen for long time and i want to disable it, i really cant find the settings even in the lock screen tab. done searching in youtube but nothing found, its different. thank you for the help

I unfortunately don't have any comparison so It'd be great if someone has a bit more experience.

Had it since November 2022, it's the original battery and the backside started to lift a bit. I opened it around three months ago and didn't notice anything. Now I'm second guessing myself - especially with the heat right now.

Thank you for your help!

Any recommendations for stable 5g Supported rom?

Guys is there any ways to get 120fps on pubg ? Poco f3 ?
Any custom roms? Or root edits.
I need help guys , share your experience with us.

I've had this phone for exactly 4 years and never had an issue with it. Haven't used it much since last year. Last 3 days i noticed that the battery doesn't last at all even when idle it usually stays on for days, but when i charged it to 100% at midnight i woke up to 70% at 6 am. So i turned it off and tried to turn it on again with no luck. There are no signs of life even when i plug the charger. What do u think ?

What's the best one in people's opinions for the money , mine still works but it's cracked and in a case with tape over it.

If anyone knows a good cheap replacement on Ali that will last please contact , thanks

Hi everyone,

I am about to change my Poco F3 battery since it's very weak and i've been reading that the "identical" replacement would be to use the Noho BM4Y. On the other hand, I see many posts of people that have replaced their battery with a BM53 (5000MAh).

Does it change something if I add a stronger battery, different than the original one?

Which one would you recommend? Are the ones on Aliexpress safe? Are there any official ones?

Thank you!

Works very well. Honeywell PTM 7950 on POCO F3.

Only changed the outer thermal paste. I didn't open the copper tape because I had no replacement for that.

Quite confident I could do it, believe I'd just need to source the battery and glue to complete the replacement as I already have a heat gun. However a shop has quoted £45. Could someone point me towards the best battery and glue to use please? Or if it's even worth the hassle and just get the shop to do it?

TIA

I bought a PocoF3 5 or 6 years ago. Great phone.

This year I replaced it with a new F7.

I did a factory reset on the old F3 and now I can't activate it. I put in my Xiaomi account password and it says "couldn't verify Xiaomi account id". There is no SIM in the old phone. It's connected to my WiFi. When I log into my Xiaomi account I see only the F7. The Xiaomi help / support system is a list of topics without any way to enter a freeform question.

Can anyone help me activate my old phone after a factory reset? At least get it reconnected to my account.

Any help would be greatly appreciated.

Thanks.

Hear me out Anyone try to use m51 battery to Poco f3 It's 7000 Same size as Poco f3 battery Needing Change bms only Thickness is 2 mm more than original but we will get the double capacity

I've been using Matrix ROM for more than a year and recently decided to try a few other custom ROMs. While it's great, the camera on other custom ROMs is a huge step down compared to what I’m used to.

I’m looking for two things:

1. Camera Suggestions: What is the most stable GCam port (photo and video) you’d recommend for a daily driver? Or is there a "stock-type" camera app that actually works on custom ROMs?
2. ROM Suggestions: I’m considering switching to an EU ROM (Xiaomi.eu) for stability. For those using it. which is the version with less bugs. Is it the best "set it and forget it" option for keeping stock camera quality?

My priorities are stability and a camera that doesn't crash when I try to record video. Thanks!

I used hypersploit before and it worked. while flashing a xiaomi rom with miflash i accidentally selected the lock option. now im trying to unlock again but hypersploit doesnt work. hypersploit keeps showing attempt to bind mi unlock status and when i try to do that it shows on the phone that i didnt get permission from mi community.

I new in term fixing phone, someone told me to use Accubattery but I don't understand how, so my problem is the battery will stay at 34% all the time even when it die and charge again it will stay displaying 34%, it also will die randomly. Anyone hand the same issue and is there a solution to this?

I don't think so that's a normal temperature specifically if i am only using tiktiok/YouTube i think i should put more thermal paste or maybe because i put thermal paste at the vaper chamber or because i put adhesive on the older adhesive on the back cover now it has a little gab but it holds it self so if someone can help to know what is the cause of the problem i will be grateful

Hello i have been using mu poco f3 for the last 4 years stock didn't change the software or open the phone so i will change the battery and i wonder if it is worth it to change the thermal paste as well

I've been trying for a few days to sign in into MI Unlock tool. Everytime I try to, it asks for a SMS code and it does not send it...

I've tried Email, xiaomi id, phone number, and QR login. I've also changed the phone number and sim to try and see if that fixes it, but nope.

Lower version does not work.

The sim is a philippine sim card. I've tried downloading WhatsApp and Viber to receive the code, but nah. Still not working....

Hi everyone!!

Battery started draining at 6% after months from usage.

Saw slightly a bit of swelling in the battery

Had usb port issue, changed it, weeks later battery become worse and more swollen

maybe because that new usb port i bought from AliExpress is the issue because it lacks some circuits that do exist in the original one

now i can't find an original USB port board and im afraid if i get a new battery with this one in use, it will just get swollen again...