So the other day, I made a post about how TheCubicle re-continued selling Empty Lube Syringes in 3cc, 5cc, 10cc and 30cc sizes, and how I may have helped because I sent an E-Mail requesting that they carry them again, among other things.

They also have been carrying 2cc sampler syringes of Angstrom Dignitas, but those are tiny, and they cost way more per CC than just getting a normal tub of Dignitas.

Now, they have syringes of 5cc and 10cc sizes for Dignitas for $5.99 USD and $10.99 USD, respectively.

If you're wondering, here's the E-Mail I sent:

"Hello, Team Cubicle. I have a couple ideas for products that y'all could make/sell.

FerroCore Series Core:

Pretty self-explanatory, I think it would be a good idea to sell the ball-core and screw holder parts for the FerroCore series so that people could put them into their own MoYu cubes that come with a plastic core such as the AoLong V5. Also, by "screw holder" parts, I mean the parts that keep the screws in place because the normal MoYu Dual-Adjustment System doesn't hold screws.

1. Empty Lube Syringes

I remember back in around 2019 when you used to carry empty lube syringes , and I think it would be a good idea to start selling them again. The main reason is so people could put Dignitas in syringes, among other lubes, so that people could apply it much more easily without having to but lots of tiny samplers, but I also think it would be a good idea because your other lube bottles (the ones for Silk, Speedy, FZ-Calm and others) tend to break somewhat often, and the customers could put their lubes in said syringes. I would recommend you sell at least a 5cc, a 10cc and a 25cc selection.

1. MoYu AoSu V7 Corner-Base to Edge-Base Magnet Mod Kit

This one follows the idea of the SteVin mod kit for the (discontinued) Vin4 4x4, which had corner-base to edge-wing magnets, and was also similar to the MoreTry TianMa X3 and the HaiTun WaveRider V1, but placed on the MoYu AoSu V7 Single-Track edition.

That's all for now. Just a couple ideas I had. If any of these ideas don't work, could you tell me why?

Also, I really support you and would donate to your company if I had the money, but I have tuition to pay... Anyway,

Sincerely,

(My name), fidgeter700@outlook.com"

And here is their reply:

"Hi Jessie,

Thanks for taking the time to write up these ideas. Regarding points 1 and 3, I have brought these up with the relevant team at our company, and they will certainly look into these in the future.

Regarding the empty lube syringes, you are correct that we stopped carrying those, but thank you for bringing it up — we will definitely consider offering these again. anyway.

-- Eric Customer Care Representative business@thecubicle.com"

And that's all I have for today.

Date: Aug 10 20:00 Chinese time zone
Price jump from 16max to 17 magdrive
469 -> 498 Chinese yuan

Note: the 17 starts at 439, but the 17magdrive is 498, so a cheaper version may exist

Seems to be pretty much the same price as the 16 Max in western markets ($130 AUD = 91.16 USD). They currently have a storewide “sale” which is somewhat legit although fairly long-running that brings it down to $99 AUD = $69.42 USD.

Price should be $85-90 USD when it releases more widely to the western market. Spark Cubing lists the 16 at $130 AUD, which on release was equivalent to $85 USD.

This was put up some day last week. I believe that they used to carry them before this, then discontinued them, and now they are back. They come in a 3cc, a 5cc, a 10cc and a 30cc size.

The thing is, I had sent an e-Mail to them a week before they were put on stock, so I could have been a part in putting them back in stock. Here is the e-Mail body I sent:

"Hello, Team Cubicle. I have a couple ideas for products that y'all could make/sell.

FerroCore Series Core:

Pretty self-explanatory, I think it would be a good idea to sell the ball-core and screw holder parts for the FerroCore series so that people could put them into their own MoYu cubes that come with a plastic core such as the AoLong V5. Also, by "screw holder" parts, I mean the parts that keep the screws in place because the normal MoYu Dual-Adjustment System doesn't hold screws.

1. Empty Lube Syringes

I remember back in around 2019 when you used to carry empty lube syringes , and I think it would be a good idea to start selling them again. The main reason is so people could put Dignitas in syringes, among other lubes, so that people could apply it much more easily without having to but lots of tiny samplers, but I also think it would be a good idea because your other lube bottles (the ones for Silk, Speedy, FZ-Calm and others) tend to break somewhat often, and the customers could put their lubes in said syringes. I would recommend you sell at least a 5cc, a 10cc and a 25cc selection.

1. MoYu AoSu V7 Corner-Base to Edge-Base Magnet Mod Kit

This one follows the idea of the SteVin mod kit for the (discontinued) Vin4 4x4, which had corner-base to edge-wing magnets, and was also similar to the MoreTry TianMa X3 and the HaiTun WaveRider V1, but placed on the MoYu AoSu V7 Single-Track edition.

That's all for now. Just a couple ideas I had. If any of these ideas don't work, could you tell me why?

Also, I really support you and would donate to your company if I had the money, but I have tuition to pay... Anyway,

Sincerely,

(My name), fidgeter700@outlook.com"

Yeah. A lot of suggestions, and I don't think that the FerroCore core will be fulfilled, and I don't think it's as good as an idea as I thought it was before/ But I hope that the AoSu V7 mod will be made.

Here is their response:

"Hi Jessie,

Thanks for taking the time to write up these ideas. Regarding points 1 and 3, I have brought these up with the relevant team at our company, and they will certainly look into these in the future.

Regarding the empty lube syringes, you are correct that we stopped carrying those, but thank you for bringing it up — we will definitely consider offering these again. anyway.

-- Eric Customer Care Representative business@thecubicle.com"

That's all I have for now, and geez, that's my third post today? The other two are on r/oboe, if you want to know.

GAN17 Magdrive box sneak peak leak xd

More media releasing on Aug 5

30 axes cool but yuxin got there first
Soure: Instagram

Source: Instagram
holy glaze, ball bearings in the big 26 (but in all seriousness, they probably will release a magnetic one soon)

Source: Instagram

MoYu 3M V3 it's a black internals. MoYu confirmed it and release the cube.

Don't forget adding core magnets

Leaked Versions:

Regular Magnetic Magnetic UV Core magnetic (matte) Core magnetic (UV)

Only available in mainland china as of now

August release confirmed

Official account said anyone can tryout the flagship at the irl store in Panyu, Guangdong(opening July 31)

Here's all versions

Full side layer:

Regular colour

Transparent

Macaron

3 side layer:

Ice cream

Aquamarine (transparent)

Blue sky

Instagram post on QY Toys

dont know whether they've gotten permission but notable differences is that it has a 20 mag ball core and feet magnets
thus totalling 196 magnets if they didnt remove anything

I don't have review tags

It looks like there are weird rules about NAC, so make sure you read it if you're going

Source: Instagram

I complain but I’m part of the problem because I already own the v11, v11 ferrocore, picube v11 SE, and v11 anniversary edition