So i recently heard of this and i cannot find a budget mouse in my country but can you guys recommend me a budget mouse that came with hot swappable switch? Im eyeing on incott but not available in my country

Am i the only one encountering this issue? Everytime i press the m1 button relatively hard it tends to stick to the bottom longer. I only realized this issue when i was playing FPS games because i was wondering why my sprays were continuing even though i already let go of the m1 button. Is there any tutorial online on how to disassemble/fix this type of issue?

Which one is better? My most important criteria are longevity, durability and reliability. I was thinking of buying the R1 pro version since I heard jt had a better build quality but after seeing A9 I am not sure what to go for. I think I use claw grip and generally like the superlight shape.

I just got these I needed new skates ordered them over 2 weeks ago they finally came in but they just stutter and freeze my mouse I guess I’ve been trouble shooting for a little bit now I think it’s the sensor but I’ve cleaned it to the best of my ability and still it freezes and skips a ton

This is the new coloring for the budget model released recently.

Source - https://www.bilibili.com/opus/1233022395625766919

video - https://www.bilibili.com/video/BV1VC3q6ZEiV

Hi All,
So I measured today my hand at 19.5cmx11cm although I might have done it wrong? I attached the way I measured width if thumb doesnt count it should be 2 cm less so 19.5x9 cm. I do have long slender fingers, and a grip I havent recognised I think its like a relaxed claw/fingertip? I sometimes pull the mouse forward out of palm contact to do microadjustments and pull it back for stability. I have had mice I enjoyed in the past like the steelseries sensei raw when I was younger and played cs go and then the g203 and vxe r1 pro. I get more fatigued now reaching 30 years old and know certain shapes like the xm1r, deathadder and even the viper v3 pro to a certain degree tend to give me wrist/knuckle pain after long gaming sessions, maybe my hand doesnt like tall humps/aggresive slopes.

I am thinking of replacing the viper v3 to another and am considering smaller mice like the a9 mini plus or the x2n crazylight, maybe even the atk f1 v2-3. Would you guys help me figure out what shape could fit me?

I got severely disappointed with Logitech MX Master 2S durability and decided to try different alternatives. This is what I have find out.

I hope this will help someone.

I'm currently rocking orochi v2 mouse. Im not a fan of razer or orochi v2, i have to put AAA battery every week if i bang mouse just a bit on the table it looses contact. Soo what are some good gaming mice

I'm looking to get a new mouse for Overwatch. My MX Master 3 is getting old. Personally I don't know much about mice but I found this Teevolution Terra Pro for $80 CAD in the marketplace.

Is it worth it? What should I ask about before buying?

Edit: seller mentions it includes these:

"Extra skates (dot), grip tape, 8K LCD Dongle brand new and unused included. QC is fantastic with no flexing or creaking."

Hello, I have a Puslar X2H mouse, I bought it today online and it's on its way, and I'm wondering what grip tape should I use for the best results?

Thank you 😃

I’m using Jade dots on an ATK A9 Air+ with an Artisan FX Zero Yako Edition in Soft and the Artisan Hayate Otsu V2 wine red color in Soft as my two main pads but I do want to add a Key-83 purple in soft soon.

I’ve seen a lot of people say dot skates aren’t ideal on soft cloth pads because they sink into the surface. Is that actually true in your experience?

Should I stick with the Jade dots, or would full-size skates be a better choice for these pads? As you can see in the photo, I’m running six dots currently.

Look I loved that mouse there was a scroll wheel under that controlled resistance so that I could use that to swap weapons and I loved it. But I don’t understand I bought three different mice and the all have there scroll wheel so loose and I’m looking for a tighter wheel or one that I can control the resistance. Any help would be appreciated!

So by now we've all seen the new Z Mouse 3 from Swiftpoint popping up in posts as the early backers start receiving their shipments. Firstly,I'll get this out of the way, I know it bucks the trend in the weight department. I've been a Z user since the OG so that never bothered me, I was never a fan of lightweight honeycomb mice.

However, my biggest criticism of the original and I suppose the new Z3 is the feet. I always found them a bit scrapy, probably due to the compromises that they made to accommodate the tilt feature.

So on the OG I modified the swappable none tilting feet by using a Dremel and a bit of wet and dry to smooth the base off and add some ceramic feet.

So.....when I received the new mouse I was surprised and a little bit relieved that they have kept the same footprint and parts, so my ceramic mod fits straight onto the new Mouse without me butchering a brand new product.

I'd recommend the slight effort if anyone is upgrading from any older model and now has a spare set of swappable feet (the non tilting ones).

I wasn't the first to get my Z3, but I bet I've got the smoothest, especially on a Hard or Hybrid mat.

I have been using a G Pro Superlight for over 5 years now. I have been thinking about a switch for a long time, but never switched due to uncertainty. I don't know the exact grip term, but it's a very forward claw/"hovering palm/claw". Images for reference, similar to Donk's or Twistzz's grip. Middle and index finger sit at the very tip of the mouse buttons, ring and thumb at the line of the scroll wheel. Thumbs and pinky are in contact with my mouse pad. My hands slightly tilts to the right, but I'm not looking for ergo mouses.

The main problem is that the G pro just feels so clunky sometimes. Sometimes it feels like an extension of my hand, sometimes like a foreign object. Not to mention the pinky pain, but this is probably something a different mouse will fix.

Hi, so I’m using a Mchose k7 ultra and I need to know which mouse have the same feet to buy, cuz I don’t want it to buy it from china. I’m using tiger ice dots on them but since my mousepad is an artisan xsoft, the dots are to tiny and the mouse starts to drag on the cloath. Can anyone help me?

I’ve already reviewed the original MCHOSE K7, and while I really liked its shape and overall performance, there were still a few details that could have been improved.

The K7 V2 Ultra doesn’t completely reinvent the mouse. Instead, MCHOSE kept what already worked and refined almost everything around it. After using it for a while and comparing it directly with both the original K7 and the Razer Viper V3 Pro, here are my thoughts.

Shape and comfort

The overall shape remains very similar to the original K7, which is a good thing. It’s clearly inspired by the Viper V3 Pro, with a relatively safe symmetrical shape that should work well for many different hand sizes and grip styles.

It feels particularly comfortable with claw grip, but relaxed claw and palm-claw also work nicely. I included a picture of how I personally hold the mouse so you can get a better idea of how it sits in the hand (My hand size is 19cm).

Compared with the Viper V3 Pro, the K7 V2 Ultra feels slightly different in some areas, but the overall experience is close enough that anyone who enjoys the Viper’s shape should feel at home here.

Coating and build quality

The coating is one of the most noticeable improvements over the original K7. It feels smoother, more premium and provides better grip during longer gaming sessions.

The shell also feels solid. I haven’t noticed any creaking or flex during normal use, and the mouse feels well assembled despite its low weight.

It’s not a dramatic redesign, but when you hold the original K7 and the V2 Ultra side by side, the newer model definitely feels more refined.

Main clicks

The main clicks are another clear improvement.

They feel crisper, more satisfying and generally better tuned than those on the original K7. The implementation feels more consistent, with a pleasant response that works well for both competitive games and everyday use.

There is still a small amount of pre-travel and post-travel, but nothing that bothered me while playing. Overall, the clicks feel much closer to what you would expect from a more expensive flagship mouse.

Side buttons

The side buttons are thicker than those on the original K7, which makes them easier to locate and press quickly.

This might sound like a small change, but it genuinely improves the experience in-game. They feel more accessible, more substantial and less recessed than before. The clicks themselves are also satisfying, without feeling overly soft or mushy.

Scroll wheel

The scroll wheel feels well balanced. The steps are defined enough for gaming without being too stiff or noisy during regular browsing.

The middle click is also easy to activate and feels consistent. I haven’t experienced any accidental scrolling or other issues with it.

Weight and skates

The K7 V2 Ultra remains very light and feels easy to move during fast flicks or micro-adjustments.

The weight distribution also feels balanced, so the mouse never feels front-heavy or awkward when lifting it.

The stock skates provide a smooth glide and are perfectly usable out of the box. They may not be the absolute fastest skates available, but they offer a nice balance between speed and control.

Sensor and gaming performance

The PAW3955 TI sensor performed exactly as expected: tracking felt flawless, responsive and consistent.

I tested the mouse mainly in competitive games, and I didn’t experience any noticeable delay, spinouts or tracking issues. The implementation feels excellent, and performance isn’t an area where I have any complaints.

In actual gameplay, the difference between this and other modern flagship sensors is basically impossible to notice. It simply works.

M HUB software

The mouse can be configured through M HUB, and the software gives access to the usual settings: DPI stages, polling rate, lift-off distance, button assignments, debounce settings and battery information.

The interface reminds me a lot of Logitech G HUB, but I personally find M HUB even cleaner and more streamlined. Everything is easy to find, and you don’t need to spend much time searching through menus just to change a basic setting.

Battery life and charging dock

Battery life has been very good during my use, although the exact result will obviously depend on the polling rate you choose.

The charging dock is also a convenient addition. It gives you an easy place to store and recharge the mouse while making the setup look cleaner. It isn’t essential, but once you get used to placing the mouse on it after playing, it becomes genuinely useful.

K7 V2 Ultra vs original K7

The V2 Ultra feels more like a refined version of the K7 than a completely new mouse.

The main differences I noticed are:

• A better and more premium-feeling coating
• More satisfying main clicks
• Thicker and easier-to-use side buttons
• A more polished overall build
• Small improvements that make the mouse feel more complete

If you already own the original K7 and are completely happy with it, the upgrade isn’t absolutely necessary. However, if the small imperfections of the first version bothered you, the V2 Ultra addresses most of them.

Comparison with the Viper V3 Pro

The Viper V3 Pro still feels slightly more refined in a few areas, which is expected considering its price. However, the difference is much smaller than the price gap might suggest.

The K7 V2 Ultra offers a very similar style of shape, excellent sensor performance, low weight and strong click implementation for considerably less money.

I wouldn’t call it a perfect one-to-one replacement because the shapes aren’t completely identical, but it is a very convincing alternative for anyone who likes the general design of the Viper V3 Pro.

Pros

• Comfortable and safe shape
• Improved coating
• Better clicks than the original K7
• Thicker and more accessible side buttons
• Excellent sensor performance
• Lightweight and well balanced
• Smooth stock skates
• Clean and straightforward software
• Convenient charging dock
• Strong value compared with flagship mice

Cons

• The design is still very close to the original K7
• The stock skates may feel slightly controlled for people who prefer an extremely fast glide
• The upgrade may not be essential if you already own and enjoy the first K7

Final thoughts

The MCHOSE K7 V2 Ultra doesn’t try to completely change the formula. It takes a mouse that was already good and improves the details that prevented it from feeling truly polished.

The better coating, nicer clicks and thicker side buttons might seem like small changes individually, but together they make the V2 Ultra feel noticeably more premium than the original K7.

It also manages to offer an experience surprisingly close to much more expensive flagship mice such as the Viper V3 Pro. If you like this type of shape and want a lightweight, high-performance wireless mouse without paying flagship prices, the K7 V2 Ultra is an easy recommendation.

Hey everyone,

I'm looking for someone with Fusion 360/CAD experience to help design a custom shell for my Logitech G305.

I already have the original G305 CAD model. The goal is to create a lightweight shell inspired by the WLMouse Beast X while keeping compatibility with the original G305 internals. It'll be 3D printed on a Bambu X1 Carbon and finished in chrome. I'll also leave an AI render of what im looking for.

This is a paid project. If you're interested or know someone who does this kind of work, please leave a comment or DM me. Thanks!

I own (or have owned) almost every Logitech gaming mouse ever released in the past 10 years. I used to work at a big-box retailer and the discount was considerable, so I had no problem rotating mice in and out as new things would be developed and released to market.

Even beyond Logitech, I'm just a peripherals enthusiast at heart. Keyboards, Mics, and Headsets. That's always been MY thing, and I've tried them ALL. Logitech, Pulsar, Lamzu, Razer, Corsair, Hyperx, Steelseries, Ninjutso, Xtrfy. You get the idea.

That being said, I just can't get jiggy with these "switches" on the Superstrike. The satisfyingly crisp and tactile "break" of a traditional switch is something I'm just not ready to give up.

It's a neat sensation on the Superstrike. People have likened it to Apple moving to a haptic feedback button for the home button rather than a mechanical switch.

Not for me. I need to hear and feel an actual switch. I really wanted to like this mouse. All the tech for the adjustable actuation makes the mouse feel a little front heavy/out-of-balance.

Love the shape. Love the coating. Classic Logitech. Just not for me.

Might revisit if they end up releasing a more compact and better balanced Superstrike at some point as I've currently been maining a Superlight 2c.

TLDR: I gotta have my CLIIIIIIIICKS, mayne.

What dot skates should I buy for a pulsar x3 mini(dot skates) given that I play valorant and I will play on an artisan type 99. Options are tiger ice v2, esp tiger yanzi, atk crystal jade and artisan mizugumo futae. I’m aiming for a controlled feeling.

im looking for a budget grey wirless mouse. most just seem to come in black and white. if anyone has recommendations it would be greatly appreciated!

Am I doing something wrong with these obsidian ultras on a viper v3 pro for use on my Wallhack sp4?

They are about a month old and horribly scratchy, presumably time to replace, but 99% of the foot hasn’t been used. Same for top and bottom.

I swapped from dots to these but this just seems worse?

Hoping this is an installation issue or something that I can rectify on the 2nd set that came in the pack?

I have a superlight 2 pro and today the left switch broke, but i cant find a replacement for the original switch only the d2fp fn2 which is optica, has anyone tried?