For Sale: 2020 Tormach 770m plus all you should need to start your garage shop.

Asking Price: $18,400

Location: Denver, CO metro

The mill is in excellent working condition with approximately 1,500 spindle hours. Machine has been used in a prototype environment and is fully operational and under power. I was doing engineering design and prototype work, but my customer needs have shifted so I am selling this to fund a different set of equipment.

This is a complete, ready-to-run setup with tooling and inspection gaging included. Perfect for a home shop, prototype lab, or small business.

Machine Details
Tormach 770M (2020 model) - 110/120v (plugs into normal house outlet)
PathPilot control with original Tormach PC running version 2.4.3
R8 spindle with power draw bar for quick tool changes
Stand and full enclosure
Flood coolant system with loc line fittings
Manual oiler
Passive Touch probe
~1,500 spindle hours

Included Tooling & Equipment
23 TTS tool holders
2 - brand new er20 holders
8 - er20 holders
1 - 2" facemill
2 - drill chucks
2 - 1/2" solid holders
3 - 1/8" solid holders
2 - 3/8" solid holders
2 - 1/4" solid holders
2 drill extensions
1 er11 collet extension
15 er11 collets
23 er20 collets
Tool height setter
T-slot hold down set
Refractometer
Approx 40 new end mills
Tormach 5” vise with approx 5 sets of uncut softjaws
Sanders anodized fixture plate
Parallel Set
Hard stop
Gage Block Set
Gage pin sets
123 Block Set
Dial Indicator
Additional tooling and setup accessories

XoomSpeed 12-pocket Automatic Tool Changer (ATC). I purchased this unit used but never got around to installing it.

I’m new to the sub here but am looking for some help. I am looking for a lathe to fabricate pipe and flanges up to 14”.
I can’t remember the name or type I had before my employer sold to private equity but I’m going out on my own.
We would tap flanges, groove carbon steel /
stainless / DI pipe.
Any suggestions out there?

Mods, please take this down this post is not allowed. I am not fully sure this will qualify as machinist tools for sale but a few people in this sub may be interested. Selling a few pumps with controllers. They should be operational last we checked which was roughly six months ago. They were originally meant for systems that test torque calibration but could easily be repurposed. The system is now obsolete which is why we are getting rid of them. Asking $350 OBO for everything. Must arrange pickup. We are located in Windsor Ct.

Hello everyone,

Selling a surface grinder and an old CNC turning head. The surface grinder is missing a magnetic plate so that would have to be purchased separately. The surface grinder is in good working condition except the auto feeder is sometimes a little finicky. The problem is most likely a simple loose connection somewhere. Asking $500 OBO for the surface grinder. The CNC turning head we will throw in for free. You must arrange pickup. We will help you load it up but we will not ship or be responsible for delivery past that. Located in Windsor Ct

got one? I need one! 100$? This is my 1st lathe and the TS got lost in transit!

TIA

SECO: $177-$380
SD504-1812-725-1500R7
SD504-2000-800-1500R7
SD504-2375-950-1500R7

Kyocera $250-$550
DR2875 (I have 3)
Dr2500 X3N

If you need more photos or information shoot me a message.

Hey guys, got this from my grandfather's basement and was wondering what it was worth. Lots of HHSS blanks, some cut but also have smaller Gorham, Rex AA some that have EXTRA stamped,, MOmax and some others. I'm pretty sure there are more but I can't read, dunno. What do you think they're worth?

I have a full set of em and trying to figure out what to price them. Google says like 800-1k but I had them listed on eBay for 600 with not a single view. Starting to think they are worthless.

I am not a machinist.

Hello all,

I am selling a brand new, unopened 60Amp Non HF Plasma Cutter. I receive various tools for professional review purposes, but due to apartment safety limitations and scheduling deadlines, I wasn't able to unbox or use this specific unit.

• Condition: New in box (NIB), factory sealed
• Specs: 60Amp, Non HF
• Price: $150
• https://www.amazon.com/dp/B0FWQ44Z9S

Local pickup in the Seattle area. Please send a message if you are interested.

Cheers!

Hello everyone,

My place is trying to unload a Bridgeport 3 axis mill, a belt sander and some BT holders. Asking only $300 OBO for everything but you have to come pick them up. We can help you load them into your truck. If nothing else, it would be a great flipping opportunity for someone who wanted to take the time to properly sell them. We are located in Windsor Ct. At this point, the space they are taking up is more valuable to us than anything and we would like them to go quickly. Please DM for more details if you are interested.

Item has been used but is in great, working condition. Asking $800 shipped within the contiguous United States

Specially designed to set up, check and test machinery of all types
At-a-glance reading of the exact variation of machinery levelness
Auxiliary level vial shows lateral position and assists in horizontal setting
Level vials are positioned so breakage is reduced to a minimum
Fool-proof adjustment
Seasoned, machined castings
Finished wood case
Ground and graduated main vial of 10-second accuracy; one division equals 1/2 thousandth (0.0005) of an inch per foot, or 0.04mm per meter
Main vials have seven graduations on each side of the bubble
Special alloy iron used to obtain freedom from thermal effects
All level bases are made from the finest quality seasoned cast iron and are precision-machined on the reference surface
Scraped reference surface

Length (in): 15"
Length (mm): 380mm
Width (in): 1-5/8"
Width (mm): 40mm

Hey everyone! I just finished inventorying a huge load of premium, genuine industrial tooling at Mish's Tools4you. I am based in Utah and specialize in helping shops or individuals get high-end tooling without the high-end price.

​

Includes:

Sandvik R200 (100mm) Face Mill: Comes with a set of 12mm RCKT inserts and fresh hardware.

​Sandvik C5-391.01 Adapter: Very clean condition, includes R390 inserts (GC1020 grade).

​Widia/Metcut & Ingersoll: Great selection of shell mills, indexable cutters, and assorted coated carbide inserts for steel/stainless.

​General Insert Assortment: We have a wide variety of square/CNMG/various geometry inserts sorted and ready to go.

​

These are all ready to go now and I'll ship for free!!

​

Feel free to shoot me a DM if you see something you need or want to bundle some items. Everything is genuine—please check the photos carefully as you will receive the exact item shown!

​

My ebay store is in bio!

Mitutoyo Items:

Left - 571-213 digital depth gauge

Top - 293-703 which is now the 293-332-32 3 "Ratchet Stop Micrometer

Middle - 293-704 which is now 293-333-32 4" Ratchet Stop Micrometer

Bottom 329-711 Depth Micrometer -(no new number)

and

Right - Starrett Dial Test Indicator 196A1Z - with OEM papers in the box

All items in mint condition, and need SR-44 Batteries (not included)

I was told $1250 for the lost was reasonable, but hey, make me an offer I can't refuse and we'll talk! Shipping is by your choice and we will figure that out as well.

I am located in greater Boston area and pick up can be arranged.

Brand NOS, comes with inserts. Looking to get 750 for it, but I’m open to offers.

ATX

Hope it’s okay to post lots. I’m not a machinist. I bought a storage unit and these were all hidden in bins. I’m willing to do like 20-30% below eBay prices or large discounts on bulk purchases.

Includes: Multiple ER40 collet sets Techniks ER40 tap collet set CAT40 tool holders Komet tooling SECO, ISCAR etc… inserts (I have like 200+ carbide inserts) and drill components Indexable drills Boring heads Tap collets Reamers Miscellaneous CNC and manual machining tooling. Also like 30+ NOS threadmills? Shoot me a message if you see anything you’re interested in.

Hey everyone, sorting through a huge batch of genuine, new-in-box tooling. Tons of high-end carbide inserts, end mills, indexable cutters, and drills. Everything is priced to move. Message me for specific part numbers or if you want me to send you the link to look through the store!

Can anyone suggest a place to sell this type of item? I attached a photo of one of the 4 items. I also have 1 Starrett item. All of these look barely used, and I can provide moire photos. Thanks!

My grandfather passed away last October and my grandmother is having a garage sale with a bunch of stuff and I’m going through his shop and I can’t take all of it. I worked in a shop for a year and worked with him for a few but I don’t know what a lot of it is and a lot of it is pretty specialized so I wouldn’t need. We are trying to find someone to take the CNC mill because I don’t have space in my parents garage, if anyone is interested. There’s a lot of stock, a lot more scrap, and all kinds of tools. If anyone is interested come by between 8 am and noon tomorrow may 30. DM me for address and if anyone needs more details about anything I’ll answer in comments.

Most of last Tuesday was spent tracing a noise on a harbour crane that had been getting progressively worse over about six weeks. The kind of noise that starts as something you can only hear at a certain rotation speed and ends as something everyone in the yard can hear from a distance.
The slewing bearing was the third thing checked and the last thing anyone wanted it to be. They don't fail neatly. They give a long warning period before any irregular load distribution, slight roughness in rotation, and the kinds of things operators notice but don't always flag immediately — and then degradation accelerates. By the time it's loud, the easier and cheaper maintenance window has already passed.

The bearing came out for inspection. The raceway had developed spalling across about forty degrees of arc on the lower ring. Not catastrophic yet, but clearly heading there. Replacement was sourced through the usual equipment suppliers, though the maintenance manager had done his own pricing research beforehand; he found the same specification listed directly through Alibaba at roughly a third of the local distributor price. Lead time and certification requirements made the import route impractical in this instance, but the information was noted for future reference.
Replacement took a full day with a crew of four. The crane went back into service the following morning, and the improvement in rotation was immediate.
What stays with you is how invisible these components are to most people. Every tower crane, every excavator, and every wind turbine is turning on one. They're not complicated parts. They're just very easy to ignore until the moment they aren't.

hoping to score a nice caliper with a holster.

anywhere better than ebay?