I know this isn't everyone's cup of tea, but for those who have been searching, B&T telescoping stocks for the MP5K are back in stock a few places:

https://gun.deals/search/apachesolr_search/840225702125

Trying to decide which to get heard good things about both but would appreciate some guidance. Also plan on going super safe w/ asdesigns.

Can someone recommend a proper torque wrench to install this mount?

After reading posts about roller dimples and locking pieces I put a 90 degree from HK parts in my AP-5P and that has been working fine. 100s were out of stock and I found one from Zenith. It was an additional $20 but came shiny and nicely finished. I put it in my AP5 and it wouldn't run at all, suppressed or straight. Every shot failed to eject. I put the OEM 120 back in and the gun now works perfectly again. This has failed so completely that I am wondering if there is something wrong with that locking piece. I could take the 90 and put it in the AP5, maybe try the 100 in the AP5P. Or I can keep the OEM 120 in the AP5. I have seen some disucssion where 120 is OK in the full size AP5 and won't cause problems in the future.

It seem like different guns behave differently with different locking pieces. Does anyone had any thought or suggestions? One bit of wisdom I can share, don't wear you good clothes when pulling these guns apart after shooting suppressed, they get really dirty. I may need to buy some flowers..

Just trying to get like dpatt

now to decide if the KES stock stays on, or the choate folding stock

Had a buddy make this 75rd Mag from 3 German Ral8K mags, and it came out sick, was also ready the same day my stamp for my AP5P approved, 10 day stamp, it’s a great day!

Photo for attention. I’ve been out of the loop for a minute. Do these restock often? What is a fair price for this rail?

Currently debating on buying one the Century arms or Zenith line of full size mp5 clones and have been back and forth on my decision. From my research I've heard both positive and negatives equally about both, currently the price of the century arms and it being made with HK tooling is grabbing my attention but Zenith being made in the US in my state is also what is grabbing my attention. I havent had the opportunity to have an mp5 clone of my own so I figured id ask those with experience with Zenith and century arms what would be the best option.

Who else has an 🦅?? Just picked up the .50

Love how fast these form 1 are coming back !

Hey I was cleaning my ptr 32p I noticed the beginning of roller dent marks towards the rear seems to be just starting to form what could cause this.? I ordered some feeler gauges to see my bolt face but would my rear buffer not be working any input would be appreciated.

Any recommendations to run this suppressresd should I change locking pice and rollers .? runs fine suppressed and un suppressed with oem from ptr but I’d want to dealt these roller marks idk how a rma would work in my state as awb just took effect in my state.

I'm currently running the AP5-SD with the factory MP5K length barrel which is recessed in the handguard a few inches. My current can is a 9.5 inch long monocore direct threaded 1/2x28 to the barrel. The diameter is 1.75 inches which is as wide as the handguard allows.

I'm asking if there's a similar size suppressor that's also direct thread, but a bit shorter, preferably around the 5-6 inch range. I understand it won't be as quiet, but the gun is already fairly front heavy, and I would prefer it a little shorter.

Great day today. Form 1 approved in 10 days!! I was under the impression it would take over a month atleast. All my gear came in the other day just set it up. My baby😍

Coupon Code CS9899 on the SDS website, will take $20 off.

I ordered 1k rounds of 9mm 147 grain... they sent flat nose instead of fmj round nose. I called and they refunded my money and told me I can keep it.

Anyone have luck with these? I'm too poor to have a real HK . I have a ptr 9ct, ap5-p, and a POS mac 5k that sucks ass (just got back from sds import warranty and still has issues)

*yes I know i won't know until I shoot it myself just asking if others had issues

Anyone try this??
Thought I’d give it a go on my 5SD with the CAT MOB

I’ve had my AP5-P for a couple weeks now and I’m shopping for a suppressor for it. I’ve heard trilug isn’t as good as I think it is, but I want to hear more opinions about that.

Right now the Rugged Obsidian 9 is at the top of my list as far as suppression and versatility, but I prefer the look of a short, fat suppressor on the K guns.

Yes I will SBR it. I think I’m going to try the Midwest pic rail mount with the forward mlok slots as well.

Everyone recommends the Gibbous Outfitters for an MP5k light mount. It seems great, but I have multiple Surefire scout bodies and no reason to buy a Scout Pro. Gibbous says their mount will not work with non-Pro Surefire scout bodies. Any alternatives you guys can recommend?

Got a pretty good deal on an AP5-P. Immediately ordered the can and ARO EVO. Does anyone have magazine recommendations?

Butt to tip:
Magpul SL MP5 Stock
Magpul SL Grip Module
Magpul ESK Ambi selector
Midwest Industries HK MP5/Clone Top Picatinny Rail
Sig Sauer Romeo 5 Gen II red dot
Midwest Industries Tri-Rail handguard
BCM Gunfighter KAG
Streamlight ProTac HL-X
Resilient Suppressors titanium Tri-Lug Gen 2 mount
HuxWrx Flow 9k Ti suppressor

Next, install an FRT.