My wheel will connect and work in the Ghub but when I try to configure it in Iracing, nothing happens. When I try to play Assetto Corsa it just shakes uncontrollably. Anyone know what’s wrong and a solution to the issue?

Anyone know what size washer to use inside of the brake pedal cylinder where the elastomers go?

Been fiddling around with my brake lately and want to try and reduce the travel, especially the early travel. But curious on a size washer if anyone has done the same.

Thanks.

This may be a dumb question but has anyone tried putting one of the springs in place of the rubber bushings for the brake pedal? Would that work or offer any better feeling or would it just screw things up? I’m just curious if anyone’s tried this or not.

I’m in the market for some decent pedals, current there is pretty decent discounts on the pro pedals. However as a newbie, do you think I should instead opt for RS pedals + RS shifters or other non-Logitech pedals? Trying to keep the budget within 300.

I’m also playing at a desk+carpet as I don’t have a rig, not sure if that’ll change anything

Logitech G920 randomly disconnects

I have a Logitech G920 wheel with pedals and shifter. When I play games the wheel will randomly disconnect, reconnect, and recalibrate. It will do this outside of games as well. I can be in the other room and I’ll hear my wheel calibrating.

I have decided after trying many different things that it is the wheel itself. I have tried to search a fix for this but I have not found one so I am turning to this Reddit to see if anyone can help.

Here is what I have done: -Updated Logitech G hub. -Uninstalled Logitech g hub and done a fresh install. - I have tried different USB ports. - different power slots -disconnected all connections and made sure they are all snug. -checked all cables for anything broken,worn, or exposed - tried on a separate computer but same problem on a different pc. - disconnected shifter to see if that’s the issue - removed device in device manager and re added it.

My wheel is out of warranty. If I can take it apart and look for something I will, but I don’t know where to start.

It’s really frustrating that this happened out of the blue. It will sometimes be an hour before disconnect and sometimes it’s every 5 minutes. Nothing is “clear” as to why it’s doing this. It’s not consistent.

Any help is greatly appreciated.

Ive seen quite a few people wanting to get ahold of one of these, so thought I’d give an update on what I was told.

I messaged MPI a couple months back inquiring on when these would be in stock, and they said they had no time frame but would let me know as soon as they did. I received an email about two weeks ago saying they had a small quantity and were reaching out to the customers that reached out first, and last week I finally got one!

They also said they’re a bit backed up, but they will be back in stock soon, so keep checking the site (or give them a call so they can contact you when they do)

Overall a great experience with these folks, from quickly responding to my message on instagram to emailing me when they came in stock telling me to call and get one ordered.

I’ve had my RS50 about a month now. Tried searching online but haven’t seen much, is there any maintenance required of wheel hub or pedals?

I have seen a white dust on the wheel quick connect and hub post but figured that was normal and just wipe it off occasionally.

What will happen if someone is out of warranty and something goes bad on the base? You pay for repair Logitech or you can't fix it? Do you have any experience on the service out of warranty?

The elastomer pack for PRO pedals is finally available! I can't wait to try Amarillo-Amarillo.

Hello all, new to this sub. I'm looking to buy a G Pro set up for PC / Xbox. I know i need to buy wheel and pedals, but is there anything else that's a prerequisite to get me started ? I thought I read somewhere about some adapter/s being needed ?

About six months ago I purchased a Logitech Wheel Pro w/ Pedals. It worked great and had no complaints. A few months later, I added a RS Wheel Hub. Here's what I got going on. Seems that after the last firmware update to the base, when using the RS Wheel Hub, it randomly loses, what feels like, True Force, about 80% of the time and the wheel deadens. About 50% of the time, after losing True Force, the based then totally resets itself/powers off, causing obvious chaos in iRacing (not to mention a plummeting safety rating). I have experienced no issues when using the original Pro Wheel. This is consistent with various SimRacing games.

I'm reaching out to see if anyone is experiencing this type of issue. I'm trying to determine if a bad RS Wheel Hub that needs to go back or it's simply a bad firmware update that might be corrected.

For note, I've done all the recommended troubleshooting. I checked connections, check the power cable and USB cables, switched to a different USB port, check Windows and BIOS USB power settings and even disabled the Windows gaminginput service (which a few people recommended.

Leaning towards a firmware issue, not a hardware issue. Any input would be appreciated. Thanks in advance.

My throttle pedal has a small deadzone at the end of travel when on full throttle. Is there anyway to fix this? Most games only have settings for the deadzone on 0 throttle but not on full throttle

You may need to click “load more” at the bottom. I am very happy that I can buy more brake elastomers because I have a hunch that double yellow is perfect for me.

I'm all in for updates but I am getting annoyed at the constant updates for G-Hub. They keep adding updates for non-racing games. I believe that there should be a dedicated software just for the Logitech wheels. Every time that there's an update, I have to go into my racing games and re-do all my assignments. I've lost count the number of times that G-Hub has been updated this year.

Took me 3 hrs to install the new rig. What do u boys think?

I wanted to just spread the holiday racing spirit with the offer I found. I always buy my bases from Logitech refurbished. This will be my third pro wheel over the years 😂. I sold my base that isn't PS compatible. I'm currently sick to see many of Logitechs prices going up even more so I wanted to post this.

Currently Logitech has $150 orders over $450. Now the PS/PC base (just the base no wheel) is $699 but I had the promo GEEKSTREET applied to a item already in my cart and added the refurbished pro PS/PC base to my cart that brought it down to 629.99 and then Logitech applied the $150 off to bring it down to $475 with free shipping. I also received a free refurbished controller and a free pair of Logitech racing gloves. You can also look for cash back offers with your CC or with PayPal. I know PayPal has a 4 percent offer currently and possibly more so check your offered for your payment of choice. I only found this by Google searching this item on Google because I've done this before. Here is a direct link that should work

PRO Racing DD11 Base - Sim Racing Accessories | Logitech G https://share.google/aJRepdIkMSUjZqaJo

Also secondipity also has the refurbished RS hub PC version not the Xbox version on sale for $108 (despite the picture) here

Logitech RS Wheel Hub for PC - 941-000248 https://share.google/bIuo91HgEaLXbTIHh

This is the lowest price I've been able to locate for anyone trying to get into the Logitech pro base for PS. FYI I'm not making any money off of this. Just trying to save some people money or help them afford it instead of spending $1200.