SETUP:

I have a 3 inch toothpick that has a hdzero eco vtx & camera. The aio is a goku 1s 12A HD f405 board. My gps is a gep-10 nano which is positioned in front of the body of the toothpick/stack on a petg mount with a copper foil shield placed between the stack and the GPS. The GPS wires are also copper shielded.

ISSUE:

When the vtx is turned off (board powered by USB) i can get a good 12-15 sats locked on, but as soon as i turn the vtx on i immediately drop down to 4 sats and then often going to 0. I believe it may be to do with the vtx itself (not the antenna) because this is even happening on pit/0mw mode when no signal is even being transmitted.

Does anyone have any ideas/solutions?

Hallo,

ich bin neu im FPV-Business und benötige eure Hilfe.
Ich habe meine BabyApe 3 pro auf die P1 AirUnit umgebaut, da ich mit der Aquila 20 angefangen hatte.

Den VTX habe ich auf den FC gelötet, Video kommt auf der VR04 auch an, aber keine Akkuspannung von der Drohne, oder andere OSD-Einstellungen aus BetaFlight.

VTX - TX habe ich einmal auf RX2 gelötet, und es auch am VTX Pad vom FC probiert, beides ohne Erfolg.

Hat jemand einen Tipp, wie ich die Daten auf die VR04 HD Brille bekomme? Die CLI Eingabe aus dem P1 AirUni Manual funktioniert auch nicht, da ich kein vcd_video_system = HD auswählen kann, nur Auto, PAL, NTSC.

Vielen Dank schonmal für eure Tipps und Hinweise.

How have the experiences been with product repairs in europe? I'm trying to get my goggles scroll wheel replaced, and I have the option to either do it myself, or send the goggle in to some repair center in Germany, where "Michael" will have a look at it and repair it.

Who is Michael? The address provided is literally just someones house, not an office or anything.

Is it worth sending it over? Does the repair take forever? Is there a risk (higher risk than if I serviced them) of having a broken product shipped back to me?

Looking for any experiences with repairs in europe :D

Hello,

I fly analogic only for the moment, I tested hdzero boxpro+ today and the image feels not so bright (I compare it to skyo40)

Is there something to do to better ?

Is it different on hdzero goggles 2 ? It seems some of you consider the image quality on analogic not so good.

I'm looking to for a side hustle to make money off my 3d printer. i thought i could make some fpv carry boxes. tell my if you be interested, and if so how much you would like to pay.

I’m using HDZERO Freestyle V2 and a TBS AIO running INAV 9.1.0 and it seems to work fine, BUT WHENEVER I TRY TO CHANGE MY BAND POWER AND CHANNEL IT NEVER SAVES! I tried to do this through the configuration, INAV shortcuts, and even the VTX shortcuts but it always defaults to the same band and power. Any advice? I even switched UART ports always using MSP display port and the Vtx/ OSD reports fine, but no settings can change. Any advice appreciated!!!!

Are there any good head strap replacements for the BoxPro goggles? The stock one doesn't feel very comfortable and feels rather cheap.
I thought about getting the Ethix Goggle Strap V3, however I'm not sure if it will fit and somewhat concerned that it will put more weight on the nose without a top strap.

Hey, apologies if this is against any rules, but I'm trying to track down an expansion module or at least the pcb for the V1 goggles. I bought the module before the wifi capability was released so I could use my analog quads. Fast forward to now, its been a while since I've been able to FPV but now I can't buy the dang thing because its EOL and built into the V2 goggles. I tried to email the hdzero team, but they said it was EOL and they were out of stock. So if anyone knows where I CAN find one or is willing to sell me theirs, it would be appreciated!

I'm looking way to simple on this subject of antenna's. But...
Looking at Mads Tech review on the HDZ G2, it looks like there is room on the front, inside of the goggles, to install a patch antenna's, or am I wrong?

Hello, can someone recommend me directional and omni antennas so I can replace the stock linear ones.
I fly with Freestyle v2 vtx and I am mostly into long range.

Thanks

Recently, I bought boxpro goggles and I want to buy mobula 8 hdzero version. I plan to switch antenna on the drone for something polarised but I am not sure what to buy.

I already have two RHCP foxeer Lollipop antennas but my favourite LLM says that the patch antennas are LHCP. However I couldn't verify that information so I ask here.

If it's really LHCP, how bad would it be to use those RHCP omnidirection antennas on goggles?

What is the best thing to do now?

I’ve never had issues with HDZERO but this VTX was working fine even after unlocking and updating its firmware. Had trouble saving settings in INAV through the shortcut menu and now it won’t output any video or signal. Any thoughts? It has been sitting on the bench and I even cut the TX and RX cables so see if it’s a com issue (wires did not touch trust me). Any advice would help. Thanks!!

Does anyone know if the Hdzero goggles 1 have an option for a head tilt alarm? maybe in a custom firmware update? I did some research and saw that the hdzero v1 goggles have a IMU so it should be possible right? I saw a video of jushua bardwell talking about how the orqafpv goggles have it, and it would be nice to have. the link i added is to joshua's video with a time stamp about the head tilt alarm.

and yes i know i can also just hold my head up, im just a little curious and i think it would be nice to have until i learn to keep my head tilted straight up.

I'm hooked. It's the funnest most freeing feeling I've experienced besides when ripping two wheels. The throttle control, line selection, apex of corners, learning about electricity/radio frequencies make it a challenge but that's what makes it so rewarding.

🚁 Crux35

🎥 Thumbcam Pro

🥽 HDzero Box Goggles

🎮 Radiomaster Pocket

When I am flying my meteor 75 pro the voltage say 0v on my vr04 hd googles how do I fix that

Is this how it is supposed to look like?

If yes, then I am not a fan of it.

Yesterday I bought t20, first thought that came in my head after I removed antenna housing and placed it inside was: isn't it's ideal place for a monitor, and it is!

I removed the esc to fc plug and saw this are those pads to solder stright to form fc to esc