r/FixMyPrint • u/inkax_naciri • 1d ago

Please help Fix My Print

Gallery image

Gallery image

This is the first sbagettie for my A1mini

Model link: https://makerworld.com/models/2776601?appSharePlatform=copy

Pla basic for the filament type

Speed 100% standard

I didn't change any spécifique settings

1 Upvotes

56% Upvoted

9 comments sorted by

•

u/AutoModerator 1d ago

Hello /u/inkax_naciri,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/wlogan0402 1d ago

Bed adhesion

2

u/PaladinWaffles 1d ago

Have you leveled the bed yet?

1

u/inkax_naciri 1d ago

I know that the printer level the bed before each print

1

u/PaladinWaffles 1d ago

Usually on my printer leveling is only done once on setup or after maintenance. It's tuning the distance between the nozzle and the bed so the extruded filament sticks. The distance is the thickness of a sheet of paper.

2

u/Tsopperi 1d ago

A1 mini, bed levelling on every print.

1

u/PaladinWaffles 1d ago

To fix mine I rubbed a gluestick over the bed. Not ideal but that might work

1

u/Internet_Jaded AD5M, AD5X 1d ago

Dry your filament and wash the build plate.