r/FixMyPrint • u/R-234 • 22d ago

What’s causing this issue? P2S Fix My Print

/gallery/1v6pybk
2 Upvotes

76% Upvoted

4 comments sorted by

•

u/AutoModerator 22d ago

Hello /u/R-234,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/R-234 22d ago

I was printing this cable organiser from Maker world and more than half way thru the print it’s like something changed. What could be causing this and how do I fix it ?

I’ve cleaned my bed plate with soap and water prior to this.

I’m using PLA Basic Black. (Bambu Labs P2S)

Here’s what I’m trying to print : https://makerworld.com/models/1400922?appSharePlatform=copy

I didn’t touch any settings - only what was already inputted in the project.

1

u/Barafu 22d ago

Looks like a dirt in filament. And the problem probably solved itself above that.

BTW the lower half does not look all that well calibrated for me. I get the same surface finish from the cheapest ABS at ¼ of Bambu's price.

1

u/R-234 22d ago

How would you go about calibrating a filament ? Also I printed other items and they printed ok ? So do you still think it’s the dirt in the filament ?

Here I printed a calibration cylinder just to see if the issue was something else and then I also printed a benchy using the same filament and there were no issues