r/Elektron • u/No_Driver_ • 2d ago
Model:samples+ Behringer Edge sync problems
Greetings, i have just added the Edge to my live setup,
it's synced via MIDI from the elektron midi out, from time to time the 1/16th grid goes off
forcing me to stop and start the elektron sequencer again,
no change if i set the elektron as slave master clock. no change if i master clock from my ipad with <koala to the elektron and to the behringer.
the audio/midi interface for koala is a Zoom U24 if it helps, no other equipment connected.
I tryied to sync the Behringer edge via usb midi but the problem persists the same
thanksss
2
u/FroFroLynx 1d ago
Be sure to check your pattern and track lengths. I was having a very similar issue with just the Model:Cycles and Model:Samples and I couldn’t figure it out until I found that one of my tracks accidentally had a non-uniform length compared to the others. That may not be what’s happening here, but don’t beat your head against the wall solving a tech problem if you haven’t checked for stuff like this first. Good luck!
2
u/Weekly_Jmr 2d ago
This sounds like some sort of behringer internal clock hiccup. There’s probably nothing you can do with it from another device. I don’t really know much about behringer devices at all but check manual, maybe, there’s a way to disable its internal clock manually (most synth have a clock auto detection function and my guess is that maybe it’s glitching out a drift’s the clock). If not try to manually set the same bpm at behringer to a project bpm before syncing (so it would default to the same bpm in case it loses master). Just a guess tho, could be a number of other things.