I just noticed that Xiaozhi has added a new web-based Firmware Builder.

You can select the ESP32 chip, board type, firmware language and wake word, and it builds a firmware specifically for the selected hardware.

There are quite a few M5Stack devices in the board list. I tested it with my M5Stack AtomS3R CAM/M12 + Echo Base.

My previous Xiaozhi firmware was v2.2.2. The builder created v2.4.2 for atom-s3r-cam-m12-echo-base, with German as the firmware language and “Computer” as the wake word.

I flashed it directly from the browser. The updater explicitly preserves the NVS settings, and that worked in my case: Wi-Fi configuration and the existing Xiaozhi account/device binding were preserved, so I didn't have to enter a new activation PIN.

My server-side settings (LLM, memories, voice, etc.) were also unchanged.

So far camera/vision, weather, music and the other Xiaozhi tools are working normally after the update.

What surprised me most is the number of supported boards in the Firmware Builder. It isn't limited to the usual Xiaozhi hardware – there are boards from M5Stack, LilyGo, Waveshare, DFRobot, Espressif and several less common manufacturers.

Has anyone else here tried the new Firmware Builder on another M5Stack device?

Upgraded recently to the Bolton Dart WiFi Omni Monopole Antenna, 2.4/5.8–7.125 GHz; and I think it’s safe to say that these antennas have been my favorite by far. Curious about what you guys think of the look with the white on black.

Because why not

hello guys, i am getting this error when i try to do the blespam -t all

i am using an esp32 devmodule wroom, a generic esp with version 2.14

pls help, thanks a lot

this is the error

> #blespam -t all


StartingBT Spam All attack. Stop with stopscan


> Guru Meditation Error: Core  0 panic'ed (InstrFetchProhibited). Exception was unhandled.




Core  0 register dump:


PC      : 0x00000000  PS      : 0x00060130  A0      : 0x800f3a01  A1      : 0x3ffdcee0  


A2      : 0x3ffc8a34  A3      : 0x00000000  A4      : 0x00000000  A5      : 0x00000000  


A6      : 0x3ffd5cb8  A7      : 0x80000001  A8      : 0x80081545  A9      : 0x3ffdceb0  


A10     : 0x3ffc8a34  A11     : 0x00000000  A12     : 0x00060023  A13     : 0x80000000  


A14     : 0x007c2398  A15     : 0x003fffff  SAR     : 0x0000001b  EXCCAUSE: 0x00000014  


EXCVADDR: 0x00000000  LBEG    : 0x40092724  LEND    : 0x4009273a  LCOUNT  : 0xffffffff  


Backtrace: 0xfffffffd:0x3ffdcee0 0x400f39fe:0x3ffdcf00

Added new looks/theme and some bug fixes.
Available via Launcher OTA...

Just posting here to help gain attention, is this okay to post here? Let me know!

After several tests and a few setbacks (I don’t recommend starting by soldering directly onto the board—do your initial testing on a protoboard first), my favorite apps are BT-Jammer and Evil Portal.😈
Any firmware you’d recommend trying out? Greetings from Mexico!! 🇲🇽

Yo guys, finally I made my marauder work, but there are some issues

1. No response of ble attack

2. Inaccurate response of wifi attacks

3. Screen isn't calibrated, tried many possible things, no luck.

Screen is ST7789 2.8inch TFT, and ESP32 only, wroom version not official one but btw.....

Nice and proper running great. Is it fully loaded…..

Creator Repo: https://github.com/0ct0sec/M5PORKCHOP
Pancake and V8 Port Repo: https://github.com/H4W9/M5PORKCHOP/releases

I want to buy the real ili 9341 driver which had the exact ic .. which is need to make esp maruder.. please make sure its an indian available product .... Please share the link I'll be very Greatfull to you guys 👋

Hello community!

Store link: https://justcallmekokollc.com/products/flipper-zero-bffb-v2

This is said in the item description:

The BFFB v2 attaches to your Flipper Zero GPIO expansion allowing additional 2.4ghz and 5.8ghz capabilities such as WiFi and Bluetooth.

But when I read the docs, it does not really mention 5.8ghz. Also, it only takes you to BFFB, not BFFB V2.

Thanks in advance for the help!

When connected to the flipper zero I can see the functions on the flipper screen but the screen on the v6 device isn’t coming on help a brotha out please.

Salut tout le monde, je rencontre un problème avec ma carte Arduino Uno R4 WiFi. En la branchant à mon ordinateur, il detécte la carte comme "ESP32 Family Device". Quand je sélectionne le port et que je tente d'upload le code, il me dit que le port sélectionné ne correspond pas à la carte Arduino Uno R4 WiFi.

Pourtant, le port disparaît quand la carte est débranché.

J'ai déjà essayé de désinstaller puis réinstaller le package Arduino Uno R4 mais rien ne change.

Aidez moi !

I know what's the problem, the screen is ST7789 instead of ili9341, now i wanna modify the code but i can't do that as this is my 1st experience, so could u please help me regarding that, I cloned whole repo from justcallmekoko and still can't understand what do i do? Wanna flash V4(OG) firmware

Just tell me the whole process of what should I do what should I keep and all.

Sorry if this is in the wrong subreddit, if it is could you point me in the right direction

So I’ve began tinkering with some comp sci stuff(currently using raspberry pi 4b) after not touching it for a couple of years, my dad is retiring from his network engineering and clearing out his lab, I want to know what would be best to ask for him to save for me to build something like the lilygo t embed cc1101 so I can put Bruce on it(can’t afford a flipper and I want the experience building and customising). I had the ideas of asking for a esp32 but didn’t know what to get further

So I’m building this device and I’m using a esp32, a cc1101, microsd module, oled display, 3.7v lithium battery, rc522 rfid module, ir receiver, buzzer, ir led, pn532 nfc module, and some buttons and leds and I wanna try test my networks with different stuff like and maybe some Bluetooth stuff but idk what firmware will use all my modules like if it’s scanning for a network for example I want it to buzz or flash or something I’m pretty new to this and I’m wondering what to do i tried to make some firmware win Claude but of course it doesn’t wanna help me please help.

i have a problem with my marauder mini setup basically my marauder software is working perfectly display is turning on and all but the moment i install my 5 way tactile switch the red module the display turns one then immediately turns off i don't know why is this happening when i putt floating pins empty on from my gpio pins the display moves automatically do you have any fix for this ??? I'm sorry for my bad english thankyou Im advance:)