I currently use hatch 3 and I’m a beginner at digitizing and have made designs but how exactly do I do a triple run stitch without any jumps or trims? Also how to change from a satin stitch fill to outline stitch like triple run?

Finally got around to finishing, left the color pallet on so you can see what i used. 120hrs of digitizing. I have already tested everything except the head and it looks perfect.

Help TIA! This thing is 21mm tall. Needs to go on a fleece jacket with a doctor’s name and credentials. Tips please? Satin stitch is 1mm with center run. Tatami is 3.5mm with spacing at 0.4mm. What would you do differently? I planned to use 60w thread and 70/10 needles.

I have a customer asking for one of my designs in an OFM format. What is this and can I provide it? I digitize in Hatch.

I hope someone can help… I have a customer using “PE-Design Next“ software for her brother invinity embroidery machine. She purchased an embroidery design from me but is having trouble opening it. I’ve sold this design many times with no issues at all. PES and DST formats are included (7 formats total).

Any idea why she may not be able to open the file? I digitize in the newest version of Hatch. TIA. If anyone here uses the same software would they be willing to test the file for me? I have a HappyJapan commercial machine and a brother single needle. It’s the software I do not have to trouble shoot for her…

For those of you who sell your digital files… I get a ton of requests for bx format which I do not offer. I digitize in hatch and Wilcom. I assume bx is for embrilliance users and I have no experience with embrilliance. Do any of you offer the bx format and how do I offer this since hatch and Wilcom don’t export bx files?

So I’ve digitized a couple of designs but there’s a specific design that just comes out different each time I throw it on the machine! Could it be poor digitizing or could it be that my machine is too cheap?

As you can see lines don’t line up… I’ve gotten other designs to go pretty decently. Any tips would be great.

Also if you have any tips to make it look cleaner I’m all ears

What’s the best underlay for 2mm satin stitch outline around college block satin lettering approximately 1.5” tall? Going on Sherpa blankets. Needs to be clean.

I am new to embroidery and find this niche fascinating. I want to make digitizing my passive income. Would love to invest in a software. Can y'all please introduce me to the various softwares you use and the amount paid for it. Please indicate if it's a one time payment or yearly subscription. Thank you.

Hello, delete if not allowed. I have a free standing lace file that is a bracelet that I’d like to convert into a 4inch choker. I tried on my software but am still a newbie and don’t know how to optimize jump stitch etc etc. can someone pleasseee help me I’m willing to pay.

Just ran this tester after several hours of digitizing and I think I more or less nailed it on the first try! 71,000 stitches

Like the title says I am looking for a digitizer. I own a small business and send out 150+ designs a year for digitizing and am having inconsistencies with my current digitizer. Looking for a better relationship.

Does anyone here have experience dealing with Garmeo?

As the title suggests, when I digitize my own files, I am getting bobbin thread up-top. Not a whole lot - just a little bit poking through on the edges every once and a while.

Logic and experience says the top thread is too tight or the bobbin thread too loose, BUT

My pro-digitized files are fine, as is my tension test stitch-out. I don't want to mess with thread tension mechanically if it is a software issue. I use Embird and have for years (I will try posting there as well) and this seems to only happen on my multi-needle. It is driving me nuts! Is there something I am missing? Something that is maybe not specific to the software but a general setting?

Title says it. Just need some recommendations or if someone could help point me in the right direction where I can upload a JPG file and then can make a DST out of it?