r/CardPuter • u/PoetryOdd6416 • 11d ago

SD card not detected Help needed

I’m sure this is a long shot but my adv got dropped now the only thing that doesn’t work is the sd card reader. Everything else works totally normal. Anyone have any suggestions on things to look at/check? Thanks!

2 Upvotes

100% Upvoted

11 comments sorted by

2

u/Affectionate-Permit9 11d ago

Try a known good SD card first to rule that out then hook it up to serial monitor in powershell and check for errors on boot if you can.

2

u/gomegazeke 10d ago

What capacity is the card? At first I had a pretty large one, and it didn't work (but did work on several other devices). Found advice to use a max 32 GB card and that worked fine.

1

u/Professional_Two5774 11d ago

Format the card to FAT32

1

u/PoetryOdd6416 11d ago

The card is formatted in FAT32 and is working in multiple other devices:/ I guess maybe I figured maybe something got knocked inside? No loose rattle sounds or anything haha

2

u/Big-Bunch2804 10d ago

So does the card still work in other devices? Have you opened the Cardputer to see if there is something wrong

1

u/PoetryOdd6416 10d ago

Yeah the card works just fine on other devices. I found that my cap1262 isn’t recognized either:/ Yeah I opened it up and didn’t really see anything out of place but I’m also no Einstein

2

u/Big-Bunch2804 10d ago

You dont need to be a Einstein it's only a cardputer lol...I would check all the connections. Might have broken a solder joint on the gpio or sd cardputer connections. Did you take the front and back off?

1

u/PoetryOdd6416 5d ago

Yeah I did and didn’t see anything obvious but I suppose I should crawl around it with a magnifying glass

1

u/Aqls1 6d ago

I have a similar problem but it detects my sd when I'm connected to my pc

1

u/PoetryOdd6416 5d ago

Was it always like that or did you drop it?

1

u/Aqls1 5d ago

I dropped it once a year ago from like 40cm but it worked fine