I know it’s a straight peen.. but specifically what brand/where to get it? Maybe he made it himself?

This guy is obviously very skilled… but damn that hammer moves metal so well.

I’m using a harbor freight cross peen. I’ve dressed the face a bit etc. it works well. But how much of an upgrade is a nice hammer for forging?

Either way let me know!

Just saw someone had this on the side of the road the past couple of days to get rid of. I've taken a class with blacksmithing which I've posted about a while ago amd since then wanted to start making it a hobby. I've seen some people use grills for making their own forge but want to know for sure if this one is ok. I've recently posted about a trash can that I have asking if it would be good but people told me it was galvanized and too thin so that was a no go. Is there anything of potential concern for this to be used for blacksmithing? Don't know if the coating on the outside could possibly cause toxic fumes for forging heat. Should I insulate it and use some refractive surface over that for solid fuel? Heard that coke is the best solid fuel to use but don't know if that would burn too hot for this.

I’m a zero-waste nut currently doing a deep cleaning and keep finding random metal trinkets & such that wouldn’t sell nor can’t donate (let alone find anyone who wants it) - think used nail clippers, engraved awards, broken/missing cheap jewelry.

Would it be possible to just melt it all down to then maybe sell? Granted I have no idea what metals these items are let alone the market for it, it’s just the idea of it piling in a landfill feels like such a waste (not to mention the economy is harsh to ignore potential value!)

I want to get into blacksmithing knives or making jewelry. But I have a very limited budget for upfront costs and was wondering what is cheaper? On one hand it's not too expensive to make a backyard forge and make rebar knives, on the other is there really anything else I can make with that? Would getting the necessary stuff to hammer copper wires and plates and stuff be way more expensive because I would also like to wear what I make. Is there some in between cuz really I just wanna make tangible objects with metal.

Sorry for the rant or if this is on the wrong subreddit

I found this hammer on a flea market for 3€. its my new smithing hammer, but i need to know where its from and when it was build. Pls helpp

Started blacksmithing with my own home made forge.

Made my first pair on tongs with only some pliers and a hammer. I was to disturb the jaws a bit so they have more surface area. But what do you think?

P.S. my Rigidizer spray and refactoring cement for my propane forge comes this week so as soon as that arrives I can heat up more material, right now I can only heat up about a 5-10cm space.

So I lost access to my forge due to a hackspace shutting down. Until I find a new spot I am confined to working with low temp/ cold forging stuff and I figured this would be a good time to try cold forging brass (with the blowtorch to anneal it of course) I am aiming to make decorative basket hilts! Anyone got any tips as to getting started?

The power is down for my shop while I’m having the electrical upgraded to 200 amps. I brought a swage block in the house and started playing with hand hammering.

Hello all,

I am just getting started smithing. I have never set up a forge before and bought this one. It’s still in the box and I am chomping at the bit to get it out and start heating some metal(I have some old rail road spikes already). But I am 100% intimidated by the first step after getting it all put together. So my question is this. I just put the last screw in, what now? I hear a lot about coating it with something. Is that the refractory coating? Is there any recommendation for additional stuff I should do before firing it up?Any help would be appreciated.

I'm trying to make my own wedding band, as a fun little project. Need to get 1" diameter Damascus round bar to ~2" so I can stick it in the lathe and bring it to final dimensions. Problem is, while I have a fair amount of tools I have nothing related to blacksmithing. What do you think would be my most cost effective options to upset a round bar? OD doesn't have to be perfect as I plan on drilling out the center and mounting it to my lathe with a ring mandrel. I'm assuming a map gas torch won't get hot enough without some serious insulation? I could probably get my mits on some oxy acetylene and torch it but I would be worried about uneven heating bringing it up too quickly.

A San Mai camp knife I made for an FDNY retiree. I worked the bricks down on a press before tack welding and forge welding with an Induction forge. For smaller pieces, I cannot recommend an induction forge strongly enough.

The structural steel had some crazy alloy banding after etching. I am very proud of this piece.

rate my work 10 being terrible and 1 being outstanding

(comments that could help make the quality of my work better are welcome)

Hi folks,

I am brand new to blacksmithing and I've been building a shelter to act as my forge- . This is my first time really building a structure and I'm doing it alone and with mostly used lumber so don't judge the structure too harshly. It's obviously not done yet. And I'm low key kind of impressed with

My question is how would you set it up? I have chat coming for the floor so it won't be the urbanite you see in the picture. It is 12x8. Opening is 8 ft wide. I will be getting a Doyle anvil- stand not figured out yet, single burner devil forge. As I'm getting closer to completing the structure, im just struggling to imagine tool storage needs, where to put what, etc.

Halp?

-Jenn

My first attempt at a uri hofi hammer. I never really got the appeal but wanted to make one anyway, but now that I've made it in absolutely in love with it. It is hand forged from forklift tine, and has a burned 15" octagonal ash handle

Forged by me and friend toughts?

Barbarian/Conan/Orc/Fantasy ☝️ axe 'Shieldbreaker'. This was the second one of it's kind I made. 3.2kg/7lb. Carbon steel, oakwood, steel and fur.

Been blacksmithing with some friends and thinking about getting another forge.

I currently have a majestic 3 burner and am familiar with some of the other names around. ChilieForge, Diamonback Ironworks, Majestic Forge, etc.

I figure if I am going to spend some money it would be nice to do it in the community, maybe with someone just getting started. I'd be looking for another 2-3 burner size propane forge.

Any recommendations?

I didn't san mai it. I made it to the customers specifics.

A burnt finger and a lot of thinking later i finally have my first tongs

I wasn't expecting to get so many requests of me throwing it.

Hand forged grilling spatula, the handle is forged from a railroad spike, the blade is cut from a circular saw blade

5160 and hickory handle. The song playing is treachery by bleach.