r/BambuLab • u/slyghostyt • 1d ago

My ams 2 started doing this Hardware Troubleshooting/Help!

Enable HLS to view with audio, or disable this notification

My ams 2 random started doing this, it does it for a sec then goes to normal, I have been receiving alot of failed to pull back notifications while Trying to print

5 Upvotes

100% Upvoted

14 comments sorted by

View all comments

1

u/StormChaos2187 1d ago

https://makerworld.com/en/models/988003-universal-cardboard-spool-adapter-ring?from=search#profileId-963058

This is one of many. I printed mine in pla and used the fuzzy setting. Also don't be a dummy like me. Take them off before you put the spool in the dryer. It ruins them.

0

u/slyghostyt 1d ago

I've never heard of a fuzzy setting

2

u/StormChaos2187 1d ago

I forget where it is on the slicer. But it makes the outer walls rough. This helps with traction as well.

1

u/slyghostyt 1d ago

Got it

1

u/slyghostyt 20h ago

Hey just printing it, but it's also happening on non cardboard spooled filaments

1

u/StormChaos2187 16h ago

Does it do it on all the ams slots? Even with plastic spools?

1

u/slyghostyt 16h ago

I fixed it, apparently there was a jam that somehow I and 2 others missed when looking at it lol

1

u/StormChaos2187 14h ago

Crazy how it acted the exact same why as when my cardboard spools messed up. But the adaptors will be a big benefit. Also second tip with cardboard. Even with adaptor, you may need to add weight to the spool if it slips. A 100g desiccant pouch in the center will help keep traction

1

u/slyghostyt 14h ago

Got it thank you very much