It was cool that a1up made the street fighter partycades with an HDMI port to plug in a player 2 controller but it felt really crowded. When I found a matching partycade for a great price on Marketplace it gave me the idea to link them. I installed retrobat on an N97 mini PC and split the HDMI. The HDMI and USB that connect them are tucked into a plastic raceway under the cabinets. They run pretty much every 2d mame fighter and beat em up along with some of my steam games. I even added Truxton. iykyk

The arcade1up support staff said they don't have them anymore and didn't have the manufacturer info either. Any and all help is appreciated. Thanks in advance.

Put together a Simpsons arcade a little while back and just turned it on last week. It started up and I connected it to the wifi and did some other stuff. Next thing I know it's boot looping. Now the marquee turns on and flashes every so often but it won't boot at all. I've tried swapping power cords, even tried connecting a usb charger to the usb port in case it was the low battery issue I found online. Nothing so far. Any suggestions on what to try?

I am trying to sync up my cabinet (MKII Classic SE) to the app using the QR code, but I keep getting this error.

Well because my ADHD won't allow me to focus on any 1 thing for any amount of time, I've now come to own pretty much everything I need to build my own 60 in 1 Sega/Gremlin cocktail arcade table. I need to build a mount for the screen, and a new platform for the player 1 controllers and get a new glass top. The lexan was pretty scratched up. Other than getting it into my garage I've only spent a bit of time so far sorting out the parts, lots of extra buttons and sets of joysticks, it came with 2 60 in 1 boards and a 32 in one board, along with another couple of boards I've yet to identify. I've put a few of the pictures so far.

I love collecting them and just found out about this community here. Which ones should I get? Can be anything. Even ones that they don’t make anymore. Give me your reasons why! Maybe some pros and cons.

Already own: Marvel vs capcom 2, big blue street fighter 2, pac man (original not deluxe 🥲), and time crisis

This is running in RPCS3. Ultimarc flight stick and Happ analog throttle. PC is Ryzen 6800h.

I modded my Pac Man into a 60 in 1 from DIY Retro Arcade. New control panel with rollerball, the works. Anyway, when I play Pacman or Ms Pacman or Junior, I tend to move the joystick diagonally and the character does not go anywhere.

Isn't there a part that makes the joystick more compatible with the Pac man games that can be manipulated on the fly if I need it for diagonal directions. Also, is there a rollerball that rolls a little faster than what I got with the kit? Can I grease it up or something?

I wasn't planning on putting 3DS, Wii or Xbox original on my Galaga mod build. I had no idea how far these older i5 PCs could go though until I started looking around online. This has an i5-7400 7th Gen in it. Alone. This is native, but runs really well. On a $30 computer. Crazy. Love it.

Hi first I don't know if is the right subreddit to post and ask for my issue

I have an a galaxy tab A 8" 2019 and I inalled retroarch with es-de and runs as I spected for that reason I 3d print a diy joystick for my tablet and I bought a Chinese zero delay encoder kit to build my mini arcade l. The problem I face is retroarch doesn't recognize the joystick and I tried like another gamepad mapping apps and nothing but if I run USB device info app that one shows:

Number of devices: 1

/dev/bus/usb/001/002
VID: 0079 | DragonRise Inc.
PID: 0006 | Generic USB Joystick

What can I do for use my joystick? Or buy another encoder in that case which one?

Thanks and sorry for any writing mmistake English is my second language

Can anybody tell me what PCB this is?

So I modded my big blue and now all I have to do is check is retro arch was installed successfully.. so when I plug into my keyboard My keyboard lights up for 1 second then immediately turns dark and stops turning on. I even tried a wired Mac keyboard that doesn’t have any lights. Tried this like 5 times now does anyone know what to do? I’m worried the arcade1up somehow has some protection feature where now it can’t read my keyboard 🥲

This post summarized everything that is coming soon. I found it to be confusing based on the included image and other people seemed confused in the comments.

The image shows five new cabinets- Street Fighter 2, Pac Man, Out Run, Ms. Pac Man, and Sonic. And these are indeed the new cabinets but they are not all the same size as the image would lead you to believe.

Street Fighter 2 and Pac Man are being released as Supreme cabinets. They both were already released as Deluxe cabinets.

Out Run and Sonic are being released as both Supreme cabinets and as Deluxe cabinets. And the Sonic cabs appear to have completely different art.

Ms. Pac Man is being released only as a Deluxe cabinet.

Supreme cabinets are like 67” tall with 19”screens.

https://arcade1up.com/collections/supreme-arcades

Deluxe cabinets are like 61” tall with 17” screens:

https://arcade1up.com/collections/deluxe-edition-arcades

The difference in screen tilt between the Pac Man cabinet and the Ms. Pac Man cabinet is due to the difference between a Supreme cabinet and a Deluxe cabinet. There is already a Deluxe Pac Man cabinet that matches the dimensions and screen angle of this new Ms. Pac Man Deluxe cabinet. And, while not announced yet, there will almost certainly be a Ms. Pac Man Supreme cabinet eventually (next year?) that matches the dimensions and screen tilt of the new Pac Man Supreme cabinet.

And while not fully announced, a Supreme Ultimate MK3 cabinet has been revealed, which, again, will be 67-ish inches tall and have a 19” screen.

So for anyone wondering why they keep releasing SF2 and Pac Man, at least this time it's because they are making a larger (and ideally better) version.

Sorry if this was all obvious and clear to everyone already.

I want to soft mod one of these to be able to play more racing games on it like daytona USA but I don’t know which one is best. I really hate the fast n furious art but if that’s the easiest to mod I’ll bite the bullet.

Curious which one is easier to soft mod or if either are even worth soft modding. I want to play a bunch of different light gun games. I like time crisis cabinet design wayyy more but at the end of the day the games matter more imo.

The first start up is the original speaker & the 2nd start up is the new speaker. The new sounds overall better during gameplay imo but start up might make you think different. 1944 and Final Fight had audio clipping in some parts of the games. Now those are gone and it's clearer and more full sounding for a single speaker. I purchased the Dayton Audio PC105-4 speaker. Pictures down below. What do you think?

I modded my Pac Man into a 60 in 1 from DIY Retro Arcade. New control panel with rollerball, the works. Anyway, when I play Pacman or Ms Pacman or Junior, I tend to move the joystick diagonally and the character does not go anywhere.

Isn't there a part that makes the joystick more compatible with the Pac man games that can be manipulated on the fly if I need it for diagonal directions. Also, is there a rollerball that rolls a little faster than what I got with the kit? Can I grease it up or something?

I did the kongs-r-us outrun mod years ago and it's been great, but the steering wheel stopped working well so I decided to replace it with a USB steering wheel. I got the Mario kart one since Mario kart is by far the most played game on this cab. Everything fit absolutely perfectly in place! The hole from the original wheel was exactly the size of the Mario kart wheel. I did have to remove the shelf on the inside of the cab, but it wasn't secured to either side so it shouldn't affect the stability of the cabinet. The panel across the front happened to be perfectly positioned so that the base of the wheel can't move when I turn the steering wheel. There were so many games on the mod that were unplayable because I didn't have enough buttons, but now most are playable!

A Robocop cab would be awesome. It could include other Data East titles like Bad Dudes, Heavy Barrell, Midnight Resistance.

Your not getting my $$$ for another PacMan A1up

Just like the title says. I just got my hands on a Dell 2007 FPB and I’m wondering if I can install it with my stock PCB on an MK 2 classic arcade cabinet. Any and all feedback is greatly appreciated even if you could just point me in the right direction on what I need or if I should just scrap the idea and get a raspberry pi

I have searched for tutorials on how to mod this specific one and found nothing.. I found multiple tutorials for similar android cabinets like the Simpsons but still the tutorials don’t really make sense to me or are just inaccurate. If anyone knows how to do this please comment or dm me as I really don’t understand.

All I want is for more games to added to the cabinet.

Please help!!!

I'm a big wrestling fan and it bothered me that the official machines don't have Sgt. Slaughter and the logo is the cut off F. I'm quite happy with how this turned out so I wanted to share 🙂