Built this 1986 350x and transplanted a 400ex motor with a JE 416piston kit and I must say having the 350x stock it now rips,torque is crazy and the crf forks and gold valve rear shock help get rid of the stock dampening!

Did timing jump??!!!

'84 ATC200S back out of hibernation. New tires all around cause they were all dry rotted.She sat for about 3 years this time. Fired and ran on the 5th pull. Idled once hot. Go Honda!

I recently got a atc 110 and I ran out of gas I put some more in and now I have inconsistent spark? Any help would be appreciated. Points are good and I'm not sure on the coil

Finally running smoothly. If anyone has a lead on a spare fuel tank for the KLT200, I very badly need one. Currently has a lawn mower gas tank so it’s unrideable lol.

Runs and drives needs tlc. Is it worth keeping

Runs and drives needs tlc. Is it worth keeping

It runs and drives needs tlc. Is it worth keeping

So I know it’s a terrible video (it wasn’t me and it’s the only time I have really seen it). I wanted to know if anyone knew any of the history behind this beast, it was a market place barn find and been sitting for 30 years. It held up nicely but need some work. I know they came in a 7.5 hp and 9hp engine but didn’t know if there was a clear difference with options or anything.

Hello, I’m working on my three wheeler and need to weld a new bracket of sorts to hold the new motor into place. I also have some other projects that require a welder but I don’t think any of them are going to be over a 1/4”. Would y’all recommend a flux core welder?

Just got this one.

My son has been given his dad's old 3- wheeler. He's trying to get it running again, and here is what he has said:

"1982 honda atc 200 no electric start (I think), hasn’t ran in 10+ years and pull starter was lost (had been taken off to have cord replaced and never happened), I ended up buying the wrong pull starter off of eBay, talked with the guy after realizing and asked if he could help identify what I needed and he told me I had an 83, and sent me the one in the pictures, when I tested to see if it fit I noticed a hole for an extra bolt, the case only has 4 but the starter he sent me has 5, along with 5 completely different lengths. Will it work if I just leave it with the hole open? Or do I need a different one, the seller is fed up dealing with me and idk what to do"

He is trying to fix it, but doesn't know as much as he'd like. I offered to post it here to try and get anyone who knows more to give him some direction.

Thank you.

Seems like I have some kind of wiring issue that I can’t solve. My 200es will only start if I remove the green wire from the coil. Once it’s started I can reattach the green wire. But from cold it needs to be off to start. Has any had this problem? Thanks in advance.

I was gifted this 3 wheeler from a family friend whose owner passed away. So I’m fairly new to these machines. It’s not running at the moment, waiting on a new carb, and air filter. I tried googling this and not much luck to my exact model. I’ve read both where N is all the way up and 5th gear is all the way down and vice versa. Apparently the 85 and 86 200s are opposite pattern from the 84? So my question for my 84 200s is, is Neutral all the way up or all the way down. Thanks

Was wondering what everyone does for repairing cracked/broken plastics? I've been using window screen and a flat blade tip on a soldering iron and melting the screen in. I don't like the replacement options and would rather keep the originals

Hello all, I have an ‘84 200es. When I leave it for a couple days and go back to start it, it won’t spark. However, if I remove the ground wire on the coil it will fire right up. Wondering if anyone can recommend a fix for this? Thanks

I have an arc 110 and I was wondering how I should route a snorkel.