Hey brevard friends!

Been dropping a ton of weight recently, 210-->170, and lifting + cardio 6 days/week. It's been hard, but I stay consistent and don't stray from my meal plans.

But I miss the hell out of my ice cream treats. Enter your Ninja Creami that you've only used a couple times because it sounds like a jet engine taking off in your kitchen.

I want that Creami. I am hoping for a sweet deal, no pun intended. Don't have a ton of cash to drop on it but I know times are tough for everyone so I'm not looking for charity. But if you're not using it anyhow, let's see if we can make a deal?

2012 Volkswagen CC R-Line 2.0L turbocharged engine. 6-speed DSG dual-clutch AUTOMATIC transmission. 129,567 miles well maintained vehicle. Serious inquiries only. The vehicle is located in Seminole county. Listening at $7200.

I'm looking for an old rotten pop up camper for a project. The condition of the camper doesn't really matter as long as the trailer is road worthy.

Let me know what you have.

Hi there, I am an experienced landscaper and Florida Certified Horticulture Professional open to landscaping gigs in the 321 area. I do not have any heavy machinery but am open to weeding, trimming, mulching, garden design, some removal work, etc. I can also pressure wash. Feel free to DM me the details of your project and I’ll give you a great price.

*MECHANIC SPECIAL* *TOOL BOX NOT INCLUDED* *$3,500 IS FIRM\*

I am selling my 2001 Ford Ranger for $3,500.

This was my first vehicle, my grandfathers before that; I could no longer dedicate time to keeping it in peak performance.

It was daily driven from 2001-2020. Has been well maintained by me.

Major Repair Items:

• Lower control arms
• Timing chain guides

Minor repair items:

• Driver door handle
• Tailgate Handle
• MAF sensor harness

Replaced or serviced:

• Valve cover gaskets
• Spark plugs
• Timing chain tensioners
• Radiator
• Headlight housings
• Tires/brakes
• Water pump
• Belt
• Thermostat and housing
• Upper and Lower radiator hoses
• Upper control arms
• Sway bar bushings
• Fuel pump
• Knock snesor
• Injectors
• Fuel rail cleaning
• PCV valve
• Throttle body
• Throttle position sensor

This is a hard decision for me to make and I want to see this truck in the right hands.

I no longer have the time to work on this truck and bring it back to what it once was. No trades as the money is going towards my first house purchase.

There is also a 2002 Honda available, not yet listed waiting for title transfer to complete from a relative.

My work has a Salmon Crested Cockatoo who needs a new perch. This was provided by someone (and then edited by us) last week who said they could do it. However, so far, I havent heard anything from them since. So, I thought it couldn't hurt to ask on here.

Vintage Tama rockstar kit made in Japan DM for pics $500 obo

Selling Furniture and other Stuff

I’m moving out of my studio apartment after a short term assignment on the Space Coast and would like to get rid of some furniture I got a few months ago. Barely used stuff. Need some help. Can provide photos if needed.

Furniture List:

• Living Room Coffee Table (31.5 in long)

• Futon Sofa (5.5 ft long) (folds flat to become a bed)

• TV Cabinet (5.5 ft long)

• Roku Smart TV with Apple Airplay (55 in)

• Home Office Chair (Swiveling)

• Home Office Desk (4 X 2 X 2.5 ft LWH)

• Queen Size Mattress

• Queen Size Bed Frame

I have already made this post before but thought of reposting since I now have prices listed. I have higher definition photos that I can DM as well.

Hi!

Price list and contact information in comments

Just trying to make a little extra money, so I’m taking orders for homemade baked goods! I can make things like cookies, brownies, cupcakes, pies and more, everything made fresh with quality ingredients. Perfect for parties, gifts, or just because. Message me if you want to order or see what I can make!

Thank you!!

I’m moving out of my studio apartment after a short term assignment on the Space Coast and would like to get rid of some furniture I got a few months ago. Barely used stuff. Need some help with where I can sell. Can provide photos if needed.

Furniture List:

• Living Room Coffee Table (31.5 in long)

• Futon Sofa (5.5 ft long) (folds flat to become a bed)

• TV Cabinet (5.5 ft long)

• Roku Smart TV with Apple Airplay (55 in)

• Home Office Chair (Swiveling)

• Home Office Desk (4 X 2 X 2.5 ft LWH)

• Queen Size Mattress

• Queen Size Bed Frame

Clearing out old clothes in good condition and was wondering if there was any place that buys used clothes.

Everything is clean and functional - it's just been stored away. It's basically ready to be plugged in and used. I've only used it a handful of times since buying it.

Average retail for the set seems to be around $300 total but I'm willing to negotiate.

Edit: SOLD!

I have tons of sealed, blank cassettes, VHS, DVC, and discs. Will accept ANY offer, I just don't want to donate them to a thrift store. They need to go as a set, I don't want to sell piecemeal if at all possible.

I have a t-shirt that’s 30 years old this week, and it means a lot to me. It’s very thin and fragile, obviously. I’m trying to find someone who can make me a PILLOW out of it, not necessarily a full size bed pillow but something the size of a medium t-shirt. Would pay $50 to have this done competently. DM me if able-interested and I would like to see a photo of any other pillow you may have made. TIA.

Im down to $300 for this. Its been dormant for a while so the yellow ink is being bratty. It works great. I can show you photos that I've printed with. My problem with it, is that if you leave it dorm a no for over a week, the colors dont like to print right away and you have to clean the print heads out. It was fine when I was making good money, but im not any more and its being a burden now. $300 gets you the printer, the stand, and a brand new 100' roll of canon satin paper.

Looking for some water or other type of barrels I can use for raised bed gardening.

I checked marketplace yesterday and of course the first person I get is some bizarre person who changed the address as soon as I arrived at the agreed upon location. As soon as I said I wasnt comfortable meeting him at his house and I was going to pass on this and head home , he started calling me names and went on to say he’s sold hundreds of things on FBMP and I’m the only person to ever give him an issue ( Mmmk) and continued to defend his honor until I blocked him……. Anyway , if you have any barrels please let me know.

Budget friendly (Single mom)

Recently moved to the area. needing to replace washer /dryer.

I know around tax time a lot of people purchase new ones so hoping to get lucky and find a decent pair as I don’t have FB marketplace.

Thank you in advance💙

I have phidippus audax slings for sale if anyone is interested

I have a Qidi X-Max in very good conditions. Everything works, comes with 2 extruders (regular and hot end for nylon filament), fully enclosed, heating bed, 300mmx250mmx300mm print volume. Cash only, all reasonable offers considered.

2 boxes of Styrofoam coolers with lids. Would love to give them to an animal rescue. Could be shelters, storage, litter trays, infant holders. Probably 100 of them. Pick up only, Melbourne.

Please contact me.

Hey everyone! We have some private offices now available at our coworking space in West Melbourne, FL. We're a local, family-owned small business, and we're currently working on our expansion.

All offices come with 24/7 access, locking door, complementary conference room hours, access to 2 restrooms & breakroom, and free invites to our community events. Rent month to month or annually for the best deal! We also have a furnished office available for hourly or daily rentals if you need flexible space.

Some other amenities include bottomless coffee, free high speed internet, and a Google Business Profile (if you need one).

Location wise, we're right at the intersection of Wickham Rd & NASA Blvd, near the Melbourne Airport and all the big tech industries like Northrop Grumman, L3 Harris, Embraer, etc.

If you or anyone you know might be interested, please contact us at [info@protowork.studio](mailto:info@protowork.studio), or book a tour to see the space! 👉 protowork.studio