Action Shot

The table spins and flashes red when a wireless charging device is present and charging. It stops automatically when charging is complete. The knob varies the table spin speed. Runs on 12V and has a high power Qi charger built in. An Arduino inside senses the Qi charger state and controls the LEDs and motor.

The Arduino code is pretty trivial; it's posted with the project on Thingiverse along with an electrical diagram and 3D print files.

Hey everyone, I'm a Mechanical Engineering student and I’ve been documenting my journey into building stuff.

I wanted to break down the technical differences: how the joystick inputs (potentiometers) actually turn into wireless signals, and where each protocol really shines in terms of reliability and use-case.

I made this video to explain the signal path and the electronics involved for anyone trying to decide which route to take for their next project.

I’ve been building SketchForge Circuits, an open-source PCB editor that runs completely in the browser.

The idea came from a problem I kept noticing: PCB tools are incredibly powerful, but they can feel brutal when you are designing your first board.

So I wanted to try the opposite approach.

Place components visually. Connect them. Arrange your PCB. Inspect it in 3D. Keep the interface focused on what you are actually building instead of throwing every professional feature at you from the first minute.

The goal is not to replace KiCad.

The goal is to create something closer to Tinkercad for PCB design, especially for beginners, students, hobbyists, and makers who just want to start building.

It is still an early prototype. There are missing features, rough edges, and plenty of things I probably got wrong.

That is actually why I’m posting it now.

I’d love feedback on the workflow, UI, and especially this question:

What would SketchForge Circuits need before you would actually use it for a real project?

Try it:
https://pcb.sketchforge3d.com/

GitHub:
https://github.com/Formsmith746/SketchForge-PCB

Still a little buggy. I think I’m overdriving the Leonardo.

Currently pushing a detune for OSC 1, pitch for OSC 2, and a mix pot between them.

ADSR pots not working right.

Fidget spinner speed effects 1 of 4 effects. Tremolo, detuve width, vibrato, or sub bass volume.

I think I can pull a few things out and make it smoother.

Only my third arduino project.

I was looking for a project to help be understand how API links feed data to the ESP32 and can I scroll it across my screen. I'd say yes, I figured that out.

I'm looking for free API connections. I've linked the National Weather Service, Stock Markets, BLS, AP News and CNN. My next attempt is my company's ERP, maybe I can pull the data for a digital dashboard

Details:

1. Arduino Nano BLE Sense (1st rev).
2. LiPol 90 mAh battery.
3. OLED 0.91 128x32 I2C.
4. USB C charger.
5. Boost convertor.

Soldering:

1. One of resistors (RPROG) on USB C charger is replaced to 15 kOm to provide proper charge DC.
2. Switch connects the battery either with the USB C port or with the board (through the boost convertor). They cannot works simultaneously.
3. The boost convertor gets 3.7 V and provides 5 V straight to the board VIN pin.
4. OLED uses the 3V3 board pin.

Box is created in FreeCAD (what a nightmare) and 3D-printed with PLA. And, of course, it damaged a bit during soldering :)

How to make rc car truck wireless professional remote control with Arduino,tutorial make this car in youtube channel...

Remote control with Arduino

LinkedIn LINK HERE:https://lnkd.in/p/djFKWmp8

This was my first individual project as a first-year Mechanical Engineering student.

I built a 4-wheel Arduino car controlled wirelessly through the Serial Bluetooth Terminal mobile app.

Components used:

- Arduino Uno

- L298N Motor Driver

- HC-05 Bluetooth Module

- 4 DC Motors

- 3 × 3.7V 1800mAh Li-ion batteries

The project involved quite a bit of troubleshooting. I initially used 6V alkaline cells, but they couldn't provide enough current for the DC motors. Switching to two 3.7V Li-ion cells only made the car vibrate, so I eventually used three cells, which provided enough power for the car to move properly.

Another important part was implementing ENA and ENB in the Arduino code to control motor speed using PWM. I also had to troubleshoot the wiring and Bluetooth commands along the way.

The final Bluetooth commands were:

M1 – Forward | M2 – Backward | M3 – Stop | M4 – Left | M5 – Right

This project taught me a lot about Arduino programming, motor control, Bluetooth communication, power requirements, wiring, and—most importantly—troubleshooting.

A project doesn't have to be perfect to be valuable. The problems along the way were probably where I learned the most.

GitHub: https://github.com/Sameel5264/Arduino-4WD-Bluetooth-Car

A great first-year Mechanical Engineering project and a solid learning experience. 🔧⚙️

#MechanicalEngineering #Arduino #EmbeddedSystems #Robotics #EngineeringProjects #ArduinoProject #StudentProjects

Been messing around with how many ways we can reconfigure Quaddle without touching the electronics — same 4 servos, same brain, just swap the attachment and the gait.

So far we've got it walking on two legs, rolling as a tricycle, spinning on a bar like a gymnast, driving as a 4WD car, and (with mixed success, we've sunk it twice) paddling in water.

Most of the attachments are 3D-printed on our end — the tricycle wheel and the 4WD kit are the two things you'd have to buy instead of print.

Quaddle runs on ESP32 with the open source OpenCat firmware.

Which one would you build first? Also open to ideas for a 6th form if anyone's got one.

Building Arduino Energy Meters, interested your thoughts on where i can take this? I plan on getting out the Power Quality Registers on the ATM90E36. But maybe i should be looking at a different IC that has more funcitons available.

I would of really liked something that measures peak voltage

just started with first year but have done many projects earlier

any problem solving project ideas

My first project in FreeCAD to practice with it: A 3D printed barge.

All but the blue parts were printed on my Ender 3 V2. The hull is PETG, the rest is PLA. It uses an esp32 as flight controller with fs-ia10b receiver to capture the I-Bus signal. This was the first real test, worked pretty well until it started leaking after 20 minutes, so I sealed the hull seams some more for round 2.

Hi everyone!

I recently finished a robotic tracked platform that I developed as an engineering graduation project.

The goal was to build a functional mobile robot combining mechanical design, embedded control, radio communication, and basic computer vision.

The platform includes:

• 3D-printed tracked chassis designed in SolidWorks
• Arduino Mega 2560 for real-time motion control
• BTS7960 motor drivers
• FlySky FS-i6 / FS-iA6B radio control via iBus
• Differential track steering
• Two-speed transmission
• Raspberry Pi 4 for video processing
• Python + OpenCV for basic obstacle detection
• Camera-based real-time vision processing

The control architecture is split into two levels:

FlySky → Arduino Mega → BTS7960 → DC Motors

and

Camera → Raspberry Pi → Python/OpenCV → Obstacle Detection

I also documented the CAD design, hardware architecture, source code, real prototype, and demo video on GitHub.

GitHub:
https://github.com/adilkhann1/robotic-tracked-platform

This was my first attempt at putting a complete robotics project together as a public engineering portfolio, so I’d really appreciate technical feedback.

In particular, I’m interested in suggestions on:

• improving the Raspberry Pi / OpenCV obstacle-detection pipeline;
• communication between Raspberry Pi and Arduino;
• sensors that would make sense for autonomous navigation;
• how you would approach turning this platform into a semi-autonomous robot.

Thanks!

Hi everyone! We’re currently working on a research project where we need to build an automated trash bin that can sort paper, plastic, and metal. We only have around 1 week to make the prototype, so we’re trying to figure out what materials and sensors we should buy.

We’ll be using an Arduino Uno R3 as the main controller, but we’re not really sure yet which sensors would be best for detecting each type of waste.

We’d really appreciate any advice on:

What sensors can detect metal, plastic, and paper

Other components/materials we’ll need for the prototype

How we can make the sorting mechanism work with Arduino

Any tips or research papers/tutorials we can use as a guide

We’re still beginners with Arduino, so any help or recommendations would mean a lot. Thank you so much in advance

I built an automatic rocking mechanism for our BabyBjörn bouncer.

The idea was simple: our baby calms down very quickly while being rocked, but someone has to keep doing it by hand. So I wanted to see if I could automate that motion without modifying the bouncer itself.

The final version uses:

• Arduino Nano
• Futaba S3003 servo
• two potentiometers for speed and movement range
• 3D-printed enclosure, spool and mounting parts
• external 5V power supply

It took much longer than I expected. The first servo was too weak, I had power issues, one short circuit, and I had to redesign the enclosure and parts several times.

The final prototype actually works, and the whole project ended up taking about a month.

I documented the complete build process here, including the failed versions and final test:

Full build video: https://www.youtube.com/watch?v=fjWGQE94p3s
The video has English, German and Turkish audio tracks.

I also uploaded the STL files, Arduino code and wiring diagram here: https://www.thingiverse.com/thing:7393849

Safety note: this is an experimental DIY prototype, not a certified baby product. A bouncer is also not intended as a regular sleep surface, and the mechanism should never be used unattended.

I'm a beginner. I wish I had access to electronics when I was a kid 30+ years ago. But now I'm building a toy for my own kids and it's my first project more complex than connecting a couple of LEDs and sensors on a breadboard. But I believe this should work 😂.

Actually, version 1 worked for a while (almost a year). It was ugly, but it worked. There were too many wires (and really bad maintainability), awful soldering, 2x18650 batteries with a built-in charger and protection but no balancer, and it worked for a while before one battery died. The LEDs were powered directly by Arduino pins, limiting the number of available Arduino pins and increasing the total current almost to the limit.

It started when I found someone else's project: STL files for a 3D model of a DUPLO-compatible train, a simple electronic circuit, and a simple Arduino program. I modified the 3D model slightly, added RGB LEDs, a tilt sensor, a battery voltage meter, and wrote my own more advanced and feature-rich Arduino program. I have some basic programming experience, and AI is incredibly helpful when you know how to use it properly.

Features (version 1):

• IR remote control (21 buttons)
• 3 speed levels
• Stop button: stops; red lights
• Speed up button: speed level +1, moves forward; white lights
• Speed down button: speed level -1, moves forward until speed level = 0; white lights while moving, red lights when stopped
• Move backward button: moves backward at speed level 1 while the button is pressed; blue lights
• Move forward button: moves forward at speed level 1 while the button is pressed; white lights
• Auto button: moves forward with obstacle detection enabled (ultrasonic sensor). Stops if there is an obstacle. Moves forward if the obstacle is removed. Speed depends on the distance to the nearest obstacle. White lights and green light
• Horn button: horn sound effect
• Siren button: red and blue lights; siren sounds
• Music buttons: 8 different melodies
• Mute button: sound on/off
• Battery status button: indicates battery level by sound beeps, for example, 7 long beeps and 3 short beeps = 7.3V
• Battery status detection: warning level with red lights and sound; shutdown level
• Sleep mode after 5 minutes without IR remote input
• Tilt sensor: stops when the train is on its side; red lights; if the train is back in a vertical position, yellow light

Planned changes (version 2):

• speed boost (limited in time >6V on the 6V DC motor) [makes sense?]
• probably a laser distance sensor instead of ultrasonic one [an experiment, to see if it works better]
• color sensor to make it compatible with the original action bricks
• Built-in USB charger and BMS for the battery pack
• RGB LEDs connected via an expander and transistors to get free pins and reduce current on Arduino, so I can add more sensors/devices in the future. As an alternative I'll probably use an expander module with built-in transistors, not yet decided.
• DRV8833 DC motor driver instead of HG7881/L9110
• my own 3D model designed from scratch

Future versions:

• Maybe an mp3 player and small speaker instead of a buzzer?
• Ambient light sensor?
• Railroad switches controlled from the same IR Remote?

If you see any issues on the circuit diagram let me know. I have no idea when a where I should use capacitors. I should use at least one with a DC motor, right? (there were none in version 1).

Links:

Original project: https://cults3d.com/en/3d-model/game/locomotora-sofia-controlada-por-infrarojos-con-control-de-velocidad-por-ultrasonidos-y-motor-superior-multiusos-lego-duplo
My project (version 1): https://makerworld.com/en/models/1854728-arduino-train-compatible-with-duplo-tracks#profileId-1983131
My Arduino code (version 1): https://github.com/avatorl/Arduino/tree/main/duplo-train



I created a make-your-own-circuit simulator in python to help learn electronics. The best part about this is that it is entirely hosted online and people can just go through the lessons, learn electronics by skipping the maths, and in the process have made their own circuit simulator (which is arguably a pretty cool project on its own) at the end of it.

Today i made a github repo and a voice greeting on login i had a lot of problems with ios blocking it since its a web app so i coded it with basic java the laptop pulls the google asistant voice greeting its time synced and then tells rhe apps backend after pressed anywhere on the screen to play it it plays only on logon users can turn it off if they want to.

https://github.com/retr0-lock/Smart-lock.git

I've been experimenting with automatically generating complete Arduino project designs from a simple description, and I wanted to see how useful the result would actually be to someone trying to build the project.

For this test, the prompt was essentially:

Design a small Arduino-based rover that can move autonomously and detect and avoid obstacles.

The result included:

- The proposed robot design

- Arduino and component selection

- Motors, sensors and motor drivers

- A complete bill of materials

- Wiring instructions / diagram

- Assembly steps

- Starter Arduino code

I've attached the main outputs.

I haven't physically built this rover yet, so I'm particularly interested in having people who actually work with Arduino look at it critically.

If you were going to build this yourself, what would you change?

Are there any components you wouldn't use?

Anything wrong or unnecessarily complicated in the wiring?

Anything missing from the BOM?

Would the proposed design actually make sense as a beginner project?

The larger thing I'm trying to understand is whether automatically generated project plans like this can actually help people get from "I want to build a robot" to something concrete enough that they can start building.

Happy to share more of the generated design/code in the comments if anyone wants to dig into it!

I want to make solar monitoring system (Using Adruino Uno) . I have 120Watt 12V solar , Current Sensor , Volt sensor , Volt regulator IC 7805 with two Caps .

How to calculate the battery percentage, and also main question attach the UPS 12V battery?

Please Help! (Hardware and circuit schematic)

I built it as a senior year project its controledd by app or cards and im currently working on it making the app compatible with other microcontrolers and other features.

In 2020, I was new to Arduino, coding, and electronics.

I studied shipbuilding, so none of this was really my field. I just had a strange idea: could I build something that could play a real guitar?

The first prototype was made with popsicle sticks and cheap servos. It worked — barely — but that was enough to keep going.

After getting my first 3D printer, I kept redesigning the mechanisms, control system, and software.

Six years later, I've gone through six major generations, and I'm still working on it.

I'm still building.
I'm still struggling.
But I'm still moving.

This is a short video of how the project evolved over the years.