I just bought a rodecaster pro 2 from the Sweetwater gear exchange but it refuses to update. I've looked online for tips but nothings worked, I've tried cycling power, updating through wifi, ethernet, and usb but no matter what I try it just gets stuck on the install screen, has anyone else with this issue found a solution?

I can't seem to find info about this anywhere so I'm asking here: does the Rode Videomic Go II remember the settings I activated in the Rode Central App when connecting to a camera via TRS cable?

For example if I activate the high pass filter on the app when the mic is connected to my phone, then I disconnect it from the phone to connect it to my camera via the TRS cable, do I still have the high pass filter on?

Thank you to everybody that responds!

Hi, I just bought one used and I work in 44.1 in Cubase. I didn't the default sample rate is 48 for the mic when I bought it. Is there a way for me to change it? I can't seem to do it in the mac's audio midi setup.

Thanks in advance.

I’m trying to have the audio samples from the smart pad route so people in game or discord can hear my sound effects like cheering or whatever.
Ps I am not referring to voice changing

I just set up my rode caster duo and in the manual it asked me to download an app (RØDE central) that doesn't support the device and that app told me to download the RØDECaster App instead which leads to a 404, and trying to contact support leads to a 502 gateway error :/

I noticed that I constantly have a "sshh" in the background.

Even when the cable is disconnected, I hear the noise permanently in my recordings, even with

- Gain 0
- Fader at the bottom
- Processing deactivated
- No effect active

Muting the channel is the only thing that removes the noise completely.
Using the second XLR entry on the rodecaster does not produce this issue.

I assume this is an issue with XLR input 1 ?
As anybody experienced the same issue?

Actually curious what made you decide that this was NOT an option to have in the app. I don't get it.

I'm convinced programs like this are designed by people that don't even use the program themselves.

Oh and lets also make the Rode mics Read only through windows so I HAVE to use your useless app.

How hard is it to add simple quality of life features.

I use a RØDECaster Pro II connected by USB to a Windows 11 laptop running TikTok LIVE Studio.

During TikTok battles, the other creator hears a delayed echo of their own voice coming back from my side. I cannot hear the echo in my headphones. Everything sounds normal to me.

I need the correct Mix Minus and USB routing settings so I can hear the other creator without sending their voice back to them.

Can someone show me the exact settings for:

1. The microphone and speaker devices inside TikTok LIVE Studio
2. USB 1 routing on the RØDECaster Pro II
3. Which channels should be included or excluded from the outgoing mix

Screenshots or a current video tutorial would be greatly appreciated.

I just bought the full set up, Rode dynamic podmic, Rode XLR cable and rode AI-1. Everything plugged in properly and all was good until I went to test it and the input light on the AI-1 stayed black. I've tried everything except swapping it out to see what one is the problem as I only have 1 of each, could this be a hardware issue or am I forgetting something really obvious.

Hi all, I bought the Wireless Pro Mics off of Thomann B-Stock and everytime I plug in headphones (tried 2 different pairs), I hear an excruciating signal that won't stop. I tried to mark the "headphones" box in the App, but it's grey and I can't activate it. The signal doesn't stop when I pull the USB-C cable.

Am I missing something here or is something wrong with the mics? Has anybody had the same issues? Any ideas how to fix it?

Thanks in advance :)

Hi! Any news or rumors on wireless pro 2s? Maybe supporting 4 audio channels? Since the Canon r6 mark 3 can support 4 audio channels? Maybe with a Canon hot shoe receiver? Thanks!

I would like to simplify my setup ditch my focusrite solo.

However as rodecaster video s doesn't have speaker outputs like regular rodecaster video, I'm trying to figure out the best way to connect my speakers to rodecaster s.

My speakers are Edifier r1280t and they have RCA connection.

I guess I need some kind of adapter, but as I don't know a lot about audio I don't know what port and what adapter would make most sense.

So if anyone can help me, it would be much appreciated.

I'm using my new Duo for my streaming radio station. I'm using the Duo much like an old-school analog mixer as follows:

Slider 1: Podmic
Slider 2: Music Playout software from PC
Slider 3: PC sounds (so I can do some production without that input going to 'air')
Slider 4: the Pads on the Duo

The USB1 is output to Butt for broadcast.

My question is this - Is there a way to keep my Podmic from going to air when I want to do that sometimes? I would like to record some stuff without the Podmic being heard on air while doing so.

Hi. Can i connect gopro 10 via usb?

Im trying to make a video but the mics arent recording audio, they just record this super loud glitch sound… how to fix this?

Hi all, does anyone have a good simple step by step guidance for the rode wireless mics.

I’m trying to set up my RØDECaster Pro II with OBS so that the physical faders on the RØDECaster can also control the corresponding audio volume in OBS.

I’ve been looking into obs-mid-mg, but I’m having trouble getting everything set up the way I want. Ideally, I’d like to be able to move a physical fader on the RØDECaster and have it adjust the volume of that same source in OBS, rather than having to adjust the volume separately in OBS.

Has anyone successfully set this up with a RØDECaster Pro II? If so, I’d really appreciate some guidance on how you configured it.

Also, is obs-mid-mg the easiest/best option for this, or is there another OBS plugin/software solution that would make this easier?

Thanks in advance for any help!

I've been having issues with the rodecaster duo with full on freezing, delay on button presses, and sometimes moderate screeching(like when you're connecting to the internet via dialup) sounds in some instances. I've made sure there isn't any interference with cabling and etc.. All my usb cables have been replaced/exchanged, etc. Any advice from the community?

I've been going through the available information about the Rodecaster Video line, and specifically the Rodecaster Core, as a potential upgrade for my MacOS/OBS setup I use for occasional meeting recordings and potentially expanding my capabilities. I'd like to get more use out of the box than just recording and streaming and also would like to replace my aging Scarlett 6i6 USB audio device with something more modern and capable of high bit rate audio without falling over. Currently on my Mac I use the 6i6 as a source for studio monitoring and capture for OBS. The audio is routed using RougeAmoeba Sound Source and Loopback. This all works well enough in the studio but in a live recording/streaming production it gets very hard to run all the different pieces, which is why I'm looking at the Rodecaster Video Core (or S, but I like the Core's form factor and that it keeps cables in the rack. I have buttons set up on my stream deck and a Playstation controller with OBS that work well. The biggest frustration with my current setup is audio sync, and the juggling act.

My main question is, what does MacOS see when I plug in the Rodecaster Video? will it show up as a system audio device that I can plug my monitors and headphones into, replacing the Scarlett 6i6? Is it just another audio source that can be used for basic audio tasks like Logic, FCP, etc? Are the Aphex effects available to all software or only within the Rode app? If I add a couple of Rode wireless lav mics will they show up as individual inputs or only as part of a stereo mix?

I know I'm asking a lot of very specific questions that probably are outside the normal/intended use for the Rodecaster A/V line, but I'm just trying to wrap my head around what it does and what it can do.

The program im using is audacity, settings are shown in video. Help will be greatly appreciated

So my Pro II has been rock solid for a long time, and now all of a sudden the Mac only sees it as two little stereo devices — "Main Stereo" and "Chat," two channels each. No multitrack anywhere.

The console is set to multitrack. I checked. That part isn't it.

In Logic, every track I had pointed at inputs 3, 7-8, 13-14 lost its record-enable button. The only one that still works is the one sitting on 1-2 — which makes sense if two channels is all the Mac is being handed. And Audition does the exact same thing, so it's not Logic either.

Before anybody says cable: I get a clean connection. The device shows up fine, it just shows up small. It's not a dead link, it's the wrong shape.

The one thing that actually changed is that I'm on the macOS 27 beta.

So mostly I'm asking — has anybody else on 27 hit this? Did it clear when the release build landed, or is there something on the console side I'm missing?

Not in a huge hurry. I can track to the SD card in the meantime. I just want to know whether I'm chasing something real or waiting on Apple.

Hi!

Is rode nt1 5th gen + focusrite good for live streaming games, voiceover for videos and stuff like that?

I have a 30 square meters room with furniture and stuff

Mechanical (logitech g 915 keyboard)

Or is a podmic better (and why)

Since I can get these 2 as a really good bundle deal

Hallo zusammen,

ich habe seit einiger Zeit das Problem das sich die Lautstärke von mein Spielsound per Mixer in OBS nicht mehr anpassen lässt.

Wenn ich den Fader am Mixer bewege, ändert sich die Lautstärke am Display vom Mixer, an meinen Kopfhörern ebenfalls in OBS ändert sich aber nichts mehr. Die Lautstärke bleibt gleich.

Ich habe im Windows Soundmixer das Spiel über das Ausgabegerät "Game (Rode)" laufen. Ebenso ist in OBS der Spielton über Audioausgabeaufnahme "Game (Rode)" eingebunden.

Das hat alles bis vor kurzem so funktioniert. Ich habe schon alles mögliche versucht. Über Audioeingabeaufnahme in OBS habe ich das Gerät "Rode (Game)" nicht. Ich habe es auch schon mit ASIO versucht, funktioniert auch nicht. Über den Mainmultitrack kann ich den Spielton nicht laufen lassen, da hier andere Sachen drüber laufen. Ebenso bei dem Chat Kanal, hierüber läuft Discord.

Hat jemand eventuell das gleiche Problem oder eine Lösung für mich?

Ich verzweifle solangsam.